| General |
| Material | steel sheet |
| Surface coating | Powder coating |
| Colour | Grey |
| Colour code | RAL 7035 |
| Number in set | 2 piece |
| Mounting position | laterally beside 19 inch profile rails |
| Fastening material | screws, nuts, washers |
| Compatibility | DIGITUS 42HE network and server cabinets from 800 mm width |
| Cable entries | on rear and sides |
| Cover | removable, as sight shield |
The DIGITUS DN-19 ORG-42U is a
vertical cable routing duct for 42 U network and server racks, specifically designed for orderly and clear cabling. The product is delivered as a set with two units and is intended for installation in DIGITUS racks with a width of 800 mm or more. The cable routing ducts are installed laterally next to the 482.6 mm (19 inch) profile rails, thereby optimally utilising the available space in the rack and enabling structured cabling.
Applications
The cable routing ducts are used for efficient routing of patch cables and other cabling within network and server racks. They are particularly suitable for environments where clear separation and organisation of cables are required to facilitate maintenance work and maintain clarity within the rack. Installation is carried out at the front and rear, with the ducts connected to the bracing of the profile rails to ensure stable fastening.
Functions and Equipment in Detail
The ducts feature multiple cable entries at the rear and on the sides, allowing cables from different directions to be accommodated. This enables flexible adaptation to various cabling scenarios. A
removable cover at the front serves as a viewing panel and conceals the routed cables, preserving the aesthetic appearance of the rack. The cover can be opened and removed to allow access to the cables.
Technology Explained Simply
The cable routing ducts are made of
robust sheet steel with a
powder coating in grey (RAL 7035). This coating provides high corrosion protection and ensures a long service life. The height of 1865 mm corresponds to the standard height for 42 U racks, allowing the ducts to utilise the entire vertical extent of the rack. The width and depth are dimensioned to provide sufficient space for cabling without unnecessarily restricting the available space within the rack.
Compatibility and Accessories
The cable routing ducts are specifically developed for DIGITUS network and server racks with a width of 800 mm or more. They are designed for installation next to the 19 inch profile rails and can be connected to the bracing of the rails at the front and rear. This enables easy and quick installation without additional tools or materials.
Installation and Mounting
Installation is carried out by fastening to the bracing of the profile rails, with the ducts mounted at the front and rear of the rack. The designated mounting points and the included screws, nuts, and washers facilitate installation. The removable cover can be removed during installation to optimise cable routing and is reattached after installation is complete.
Operational Advantages
Ordered cable routing improves clarity within the rack and simplifies maintenance work as well as cable identification. The robust construction from sheet steel with powder coating ensures a long service life and high protection against corrosion. The removable cover maintains a neat appearance, while the multiple cable entries allow flexible adaptation to various cabling scenarios. The delivery as a set with two ducts and mounting materials provides a complete and immediately usable solution for cable routing within the rack.