Further information for DIGITUS DN-19 FAN-4-HO-SW Fan Module 4 Fans Black
General
Degree of protection
IP20
Noise level
47 dBm
Airflow
9.2 m³/min
Number of fans
4
Thermostat
0 to +35 °C
Supply cable length
1.8 m
Connector type
CEE 7/7 (Type-F)
Colour
Black
Rack size
48.3 cm
Mounting bracket
included in delivery
On/off switch
The DIGITUS DN-19 FAN-4-HO-SW is a rack fan unit with four integrated fans, specifically designed for use in 48,3 cm ( 19 inch ) network and server racks with a width of 48.3 cm. The device serves for active removal of waste heat from IT components installed in the rack and can be mounted variably in the 483 mm (48,3 cm ( 19 inch )) plane. The fan unit is finished in black (RAL 9005) and is suitable for use in standard and varioFLEX racks, with mounting achieved via pre-installed mounting brackets.
Applications
The fan unit is designed for a wide range of DIGITUS network rack models, including DN-10 05-U, DN-19 04U-PB, DN-19 07-U, DN-19 09-U, DN-19 12-U, DN-19 16-U, DN-19 20-U, DN-19 22U-6/6, DN-19 26U-6/10, DN-19 32U-6/6, DN-19 36U-6/6-SW, DN-19 42U-6/10, DN-19 42U-6/6, DN-19 42U-6/8, DN-19 47U-6/8, DN-19 SRV-26U-EC, DN-19 SRV-42U-8-GD, DN-19 SRV-47U-8-GD and others. The unit is therefore compatible with a broad range of rack types used in IT infrastructures.
Functions and Features in Detail
The unit features four fans achieving an airflow rate of 9.2 cubic metres per minute. The fans are equipped with a thermostat adjustable within a range of 0 to +35 °C, enabling the fan operation to adapt to the actual temperature inside the rack. Additionally, an on/off switch is integrated, allowing manual control of the fans. The noise level is 47 dBm, suitable for quiet operation in server rooms.
Technology Explained Simply
The fan unit is powered via a 1.8 m long cable with a CEE 7/7 (Type-F) plug. Power supply is from the mains, with the fans automatically activated by the thermostat once the set temperature is reached. Mounting is done using mounting brackets included in the delivery, allowing flexible installation in the 48,3 cm ( 19 inch ) plane or in the roof area of varioFLEX racks. The protection rating IP20 protects against contact with moving parts and is suitable for use in enclosed rooms.
Compatibility and Accessories
The fan unit is specifically developed for the mentioned DIGITUS network rack models. The included mounting brackets allow installation in various positions within the rack, ensuring optimal air circulation. The unit is not intended for outdoor use or in damp environments, as the IP20 protection rating does not provide waterproofing.
Mounting and Installation
Mounting is achieved by securing the fan unit to the mounting brackets, which are inserted into the 48,3 cm ( 19 inch ) grid of the rack. The power cable is connected to a mains socket. The positioning of the unit can be adjusted according to the heat generation of installed devices in the rack. Installation does not require special tools, although a screwdriver is necessary for securing the mounting brackets.
Operational Advantages
The fan unit ensures efficient cooling of IT components through automatic temperature control and variable mounting positions. The integrated switch function allows manual control, while the thermostat ensures energy-saving operation. The fan unit is thus a reliable accessory for maintaining operating temperature in IT infrastructures.