| General |
| Degree of protection | IP20 |
| Noise level | 47 dBm |
| Airflow | 4,6 m³/min |
| Number of fans | 2 |
| Thermostat | adjustable 0 to +35 °C |
| Switch | ON/OFF switch |
| Supply cable | 1,8 m |
| Connector type | CEE 7/7 (Type-F) |
| Colour | Grey (RAL 7035) |
| Mounting | 19" rack, varioFLEX ceiling mounting |
The DIGITUS fan unit DN-19 FAN-2-HO is an accessory module for 483 mm (48,3 cm ( 19 inch )) network and server racks, designed for active dissipation of waste heat from IT components. Designed as a slide-in fan, it can be flexibly mounted in the 48,3 cm ( 19 inch )-plane, rather than exclusively under the cabinet roof. The unit is finished in grey (RAL 7035) and features two integrated fans to support air circulation within the cabinet. The fan unit is equipped with an adjustable thermostat and an ON/OFF switch to adapt operating conditions to specific requirements.
Applications
The fan unit is designed for use in IT infrastructures where controlled cooling of devices in rack systems is required. It is particularly suitable for network and server cabinets with a width of 483 mm (48,3 cm ( 19 inch )), installed in data centres, server rooms, or IT administration rooms. The variable mounting allows flexible positioning within the cabinet, independent of the roof position, which is advantageous for different cabinet configurations.
Functions and Features in Detail
The unit features two fans achieving an airflow rate of 4.6 cubic metres per minute. The integrated thermostat is adjustable and enables temperature control in the range of 0 to +35 °C, activating the fans only when a specific temperature threshold is reached. A separate ON/OFF switch allows manual control of the fans, independent of the thermostat. The noise level is 47 dBm, suitable for quiet operation in office environments.
Technology Explained Simply
The fan unit uses a passive cooling approach, where air is moved by the fans to dissipate heat from the cabinet. Temperature control is managed by the thermostat, which activates the fans when the set temperature is reached. Installation is carried out using included mounting brackets, suitable for securing in the 48,3 cm ( 19 inch )-plane or in the roof of varioFLEX cabinets. The unit is designed for indoor use and complies with protection class IP20, meaning protection against contact with fingers and against solid foreign objects larger than 12.5 mm.
Compatibility and Accessories
The fan unit is designed for 483 mm (48,3 cm ( 19 inch )) cabinets and can be mounted in the 48,3 cm ( 19 inch )-plane. The included mounting brackets allow installation in both standard positions and in the roof area of varioFLEX cabinets. The unit is available in grey (RAL 7035) and can optionally be equipped with two or four fans, with the DN-19 FAN-2-HO model specifically designed for two fans.
Mounting and Installation
Mounting is performed using the included mounting brackets, which are attached to the 48,3 cm ( 19 inch ) mounting rails of the cabinet. The fan unit is inserted into the mounting brackets and secured. The power cable is 1.8 m long and ends in a CEE 7/7 (Type-F) plug, to be connected to a mains power supply. Installation requires no additional tools or components.
Operational Advantages
The fan unit provides flexible and efficient cooling for IT systems in rack installations. The combination of thermostat and manual switch enables precise control of cooling performance. The low noise level of 47 dBm ensures quiet operation, acceptable in office environments. Mounting is simple and requires no special tools, allowing quick installation without specialist expertise. The unit is designed for indoor use and meets requirements for EMC-compliant devices.