DIGITUS DN-19 42U-8/10-1, EAN: 4016032331186

DIGITUS DN-19 42U-8/10-1 Network Cabinet 42HE gray

19 Inch-Technology > Rack Cabinets > Racksystems 31+HE

DIGITUS DN-19 42U-8/10-1 Network Cabinet 42HE gray

Lieske Part No. 236939
Mfg Part No DN-19 42U-8/10-1
EAN-Code 4016032331186
Manufacturer DIGITUS
Here only 1.762,89 EUR
2.097,84 EUR incl. VAT

Further information for DIGITUS DN-19 42U-8/10-1 Network Cabinet 42HE gray

General
Number of rack units42 HE
ColourGrey RAL 7035
Degree of protectionIP20
Load capacity1200 kg
Materialsteel sheet up to 1.5 mm
Surface coatingElectrostatic powder coating
Front doorSafety glass with steel frame
Rear doordouble-leaf
Side wallsLockable and removable
DIN railcrimped, galvanised 483 mm (19") rails
Cable entrieswith brushes on top, bottom and rear
Floor chassismodular, openable, with removable blank plates
Ventilationventilation slots, brush strips
Roof preparationfor fan unit and removable cover
Condition on deliveryMounted
Leveling feet4 pieces, already installed
Lockprofile half-cylinder lock type 333
Key2 pieces
Installation kitscrews, cage nuts, washers
The DIGITUS network cabinet DN-19 42U-8/10-1 from the Unique Series is a 42 U floor-standing cabinet designed for use in IT infrastructures, engineered for maximum stability and flexible cabling. It features dimensions of 2053 mm height, 800 mm width, and 1000 mm depth, and is powder-coated in grey (RAL 7035). The construction is made of steel sheet with a thickness of up to 1.5 mm, ensuring high mechanical strength. The front door is made of safety glass with a steel frame and includes a swing handle with an integrated half cylinder lock, including two keys type 333. The door opening angle is 120 degrees, and the door hinge can optionally be changed from left to right. The side panels and rear door are modular, lockable, and removable, facilitating accessibility and maintenance. The rear door is double-leafed.

Applications

The cabinet is designed for indoor use and is suitable for network and server applications. It can be used as a network cabinet or server rack depending on requirements, taking into account the heat generation and weight of installed components. Integrated ventilation slots support passive cooling, and the rear is equipped with brush strips above and below the rear door (from 26 U) to enable flexible cable routing.

Functions and Equipment in Detail

The interior of the cabinet is equipped with two pairs of crimped, galvanized 483 mm (48,3 cm ( 19 inch )) profile rails, which are continuously adjustable in depth and connected to additional depth braces within the cabinet. The U units are marked in reverse, simplifying installation. The load capacity of the profile rails is up to 1200 kg. The floor chassis is modular and openable, with removable 48,3 cm ( 19 inch ) blanking plates providing space for cable routing. The floor includes an insertable cable entry with a foam rubber seal. The front side features vertical cable ducts with cable routing aids and a cover, installed from a cabinet width of 800 mm. The cable entries are generously sized and located at the top, bottom, and rear, with side entries equipped with brushes.

Technology Explained Simply

The construction from 1.5 mm thick steel sheet and electrostatic powder coating ensures high mechanical stability and corrosion protection. The powder-coated surface in grey (RAL 7035) is available as standard. The profile rails allow flexible mounting of devices at various depth positions. The brush strips at the cable entries prevent dust ingress and reduce cable entry into unintended areas. The integrated ventilation supports cooling of installed components. The cabinet construction is disassemblable, allowing complete disassembly if required.

Compatibility and Accessories

The cabinet is compatible with various accessories that extend its functionality. These include shelf trays in different heights (1 U, 2 U) and load capacities (up to 25 kg or up to 100 kg), patch panels in various port counts (8, 24, 48) and categories (Cat5e, Cat6, Cat6a), cable management brackets, terminal strips, cover plates, drawers, routing panels, and equipotential bonding rails. These elements enable individual adaptation to specific applications.

Mounting and Installation

The cabinet is delivered pre-assembled and is immediately ready for use. Installation is performed using the pre-mounted levelling feet already attached under the cabinet. The doors and side panels are removable, simplifying installation and maintenance. The profile rails are continuously adjustable, allowing flexible adjustment of device mounting positions. The roof structure is prepared for mounting a fan unit and for a removable cover.

Operational Advantages

The combination of high load capacity, flexible cable routing, modular doors and side panels, and disassemblable construction offers high adaptability to different application scenarios. The integrated ventilation slots and brush strips support efficient cooling and cable routing. The powder-coated surface ensures a durable, robust, and aesthetically pleasing finish. The cabinet construction is designed for use in professional IT environments and meets requirements for stability, safety, and maintainability.

Protection Rating and Operating Conditions

The cabinet has a protection rating of IP20, meaning it is protected against ingress of foreign objects larger than 12.5 mm, but is not waterproof. It is intended exclusively for indoor use. The front door is made of safety glass with a steel frame, providing additional security.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/236939
qrcode für DIGITUS DN-19 42U-8/10-1 Network Cabinet 42HE gray