Further information for DIGITUS DN-19 42U-6/8-B-1 Network Cabinet 42U black
General
Mounting depth min.
688 mm
Maximum depth of installation
943 mm
Number of height units (HE)
42
Colour
Black
RAL-number
9005
Degree of protection
IP20
Material
steel sheet
Surface coating
Powder-coated
Number of profile rails
4 piece
Profile rail width
483 mm
Load capacity of profile rails
1200 kg
Total load capacity
800 kg
Front door
safety glass with metal frame
Rear door
single-leaf
Door opening angle
120 °
Locking
1-point locking
Swivel handle
with profile half-cylinder lock
Side walls
Lockable and removable
Cable entry floor
slidable with foam rubber seal
Cable entry rear side
with brush strips above and below rear door
Roof
with stepped lid and ventilation slots
Fan unit
prepared for mounting
Leveling feet
4 pieces, already installed
Installation kit
screws, cage nuts, washers
Disassemblability
The DIGITUS network enclosure DN-19 42U-6/8-B-1 from the Unique Series is a 42 U network enclosure in black (RAL 9005) with dimensions 2053 mm (height) × 600 mm (width) × 800 mm (depth). It is designed for use in IT infrastructures where high stability and flexible cabling solutions are required. The construction from up to 1.5 mm thick steel sheet with electrostatic powder coating ensures a robust and long-lasting structure. The front door consists of a metal frame with safety glass, while the rear features a single-leaf door. Both doors open 120° and are equipped with a 1-point locking mechanism. A swing handle on the front door allows the use of a half cylinder (adapter included), providing additional security. The side panels are modular, lockable, and removable, facilitating accessibility and installation. A door hinge reversal is possible to optimize installation at different locations.
Applications
This enclosure is suitable for indoor use and is designed to house network and server components. Depending on requirements, it can also be used as a server rack, particularly when considering heat generation and weight of installed components. The construction allows flexible use in data centers, server rooms, IT cabling centers, or other technical rooms where structured and secure cabling is necessary.
Functions and Equipment in Detail
The interior of the enclosure features two pairs (four pieces) of crimped, galvanized 483 mm (48,3 cm ( 19 inch )) profile rails, which are continuously adjustable in depth and connected to the enclosure via depth braces. The height units are labeled in both directions, facilitating precise positioning of devices. The installation depth for components ranges from 688 mm to 943 mm. The base chassis is modular and openable, with removable 48,3 cm ( 19 inch ) blanking plates, enabling flexible cable routing. The base includes an insertable cable entry with foam rubber gasket, ensuring clean and damage-free cable routing.
Technology Explained Simply
The enclosure construction is designed for high mechanical load capacity. The use of 1.5 mm thick steel sheet and galvanized profile rails ensures long service life and resistance to corrosion. The powder coating in black (RAL 9005) provides uniform surface quality and protection against environmental influences. Integrated depth braces stabilize the rails and prevent bending under heavy load. Cable entries with brush strips at the rear (above and below the rear door) and in the base allow clean and flexibly designed cable routing. For enclosures 800 mm wide and above, additional vertical cable ducts with front trim panel are integrated to support internal cable routing. The roof features a stepped cover with ventilation slots for improved air circulation and is prepared for mounting a fan unit for active ventilation.
Compatibility and Accessories
The enclosure is compatible with various accessories that extend its functionality. These include, for example, shelf trays in various sizes and load capacities (up to 100 kg), sliding ventilation units with 2 or 4 fans, wall mounts for patch panels, patch panels in various configurations (e.g. 24-port Cat6a shielded), roof fan units, power strips, drawers, blanking panels, and equipotential bonding bars. These components can be added as required to optimize cabling, cooling, and safety.
Installation and Mounting
The enclosure is delivered fully assembled and ready for immediate use. It features four levelling feet already installed under the enclosure to ensure a level standing surface. An installation set (screws, cage nuts, washers) is included in the delivery scope. The disassemblable construction allows for disassembly if needed, enabling installation even in hard-to-reach locations. The doors can be easily removed, and door hinge reversal is possible to facilitate installation on different walls or in confined spaces.
Operational Advantages
The combination of high load capacity, flexible cable routing, and modular elements offers high adaptability to different requirements. Integrated cable ducts and brush strips reduce the risk of cable damage and simplify maintenance. The robust steel construction ensures long service life, and the powder-coated surface is easy to maintain. The preparation for fan units enables active cooling, which is important at high device density. Modular side panels and doors improve accessibility and simplify installation and maintenance of devices.
Protection Rating
The protection rating of the enclosure is IP20, meaning it is protected against ingress of foreign objects larger than 12.5 mm, but is not waterproof. Use is exclusively indoors.