Further information for DIGITUS DN-19 36U-8/8-1 enclosure grey
General
Degree of protection
IP20
Number of height units
36 HE
Modular spacing
482,6 mm
Colour
Grey
RAL-number
7035
Material
Steel
Surface coating
Powder-coated
Load capacity of profile rails
1200 kg
Profile rail version
Crank
Number of doors
2
Door type
Glass
Rear door
double-leaf, steel
Side walls
lockable, removable
Cable entry
brush strips in roof, floor, rear
Roof
prepared for fan unit
Floor chassis
modular, openable, with blank plates
Ventilation
Passive
Cable channels
vertical, in front side
Lock
profile half-cylinder lock type 333
Disassemblability
Grounding
Socket
Front door
Rear side
The DIGITUS network enclosure DN-19 36U-8/8-1 from the Unique Series is a 36 U network enclosure with dimensions of 1787 mm height, 800 mm width, and 800 mm depth, finished in grey (RAL 7035). It is designed for use in IT infrastructures where high stability and flexible cabling solutions are required. The construction is made of steel sheet with a maximum thickness of 1.5 mm, coated with electrostatic powder coating to prevent corrosion and ensure uniform surface quality. The front door is made of safety glass with a steel frame and features a swing handle with a half cylinder lock, including key type 333. The door hinge direction can be optionally changed from left to right, facilitating installation at different locations. The rear is equipped with a double-leaf steel rear door, which is also lockable. The side panels are modular, lockable, and removable, improving accessibility and maintenance of installed components.
Applications
The enclosure is primarily designed for housing network and cabling components in indoor environments. Due to its robust construction and the ability to adapt flexibly to various requirements, it can also be used as a server rack, particularly when considering the heat generation and weight of installed devices. The passively ventilated construction supports cooling of installed components, with the use of perforated steel sheet doors enabling improved passive cooling. The enclosure is suitable for use in data centres, server rooms, IT cabling centres, and similar environments.
Functions and Equipment in Detail
The enclosure features two pairs of crimped, galvanised 483 mm (48,3 cm ( 19 inch )) profile rails, which are continuously adjustable in depth and connected to additional depth braces within the enclosure. The height units are marked in reverse, facilitating precise positioning of devices. The maximum load capacity of the profile rails is up to 1200 kg. The base chassis is modular and openable, with removable 48,3 cm ( 19 inch ) blanking plates that allow flexible cable management. Large vertical cable ducts with cable routing aids and a cover are installed on the front side (from 800 mm enclosure width), optimising cabling along the front. Cable entry is provided via generous openings with brushes on the roof, floor, and rear, ensuring flexible cable routing. The rear features brush strips above and below the rear door (from 26 U), enabling use in various application scenarios. The roof is prepared for mounting a fan unit and can be fitted with a removable cover.
Technology Explained Simply
The construction of the enclosure is based on a stable steel frame designed for high mechanical loads. The profile rails are designed to support high load capacities, which is important for mounting heavy network or server equipment. The powder coating ensures high corrosion resistance and uniform surface finish. The safety glass front door with swing handle and lock provides secure access, while the removable side panels and doors facilitate maintenance. The brush strips at cable entry points prevent dust ingress and reduce mechanical stress on cables. The vertical cable ducts on the front side support structured cabling and reduce the risk of cable entanglement.
Compatibility and Accessories
The enclosure is compatible with a wide range of accessories that extend its functionality. These include patch panels in various port counts and categories (e.g. Cat6, Cat3), shelf floors in various sizes and load capacities (up to 100 kg), drawers, cable management panels, cable routing brackets, blanking plates, socket strips, and insert ventilation units. These components can be combined according to requirements to adapt the enclosure to specific application conditions. The mounting set 25,4 cm ( 10 inch )/48,3 cm ( 19 inch ) components M6 50 pieces black is also available to support installation.
Mounting and Installation
The enclosure is delivered pre-assembled and ready for immediate use. However, it can be completely disassembled if required, increasing transport and installation flexibility. The doors and side panels are removable, facilitating installation and maintenance. The profile rails are continuously adjustable, allowing individual positioning of devices. Cable entry is via the designated brush strips, enabling clean and structured cabling.
Operational Advantages
The enclosure offers high mechanical stability, flexible cable routing, and secure accessibility. The modular construction allows adaptation to different requirements, whether for network cabling or server applications. The passively ventilated construction supports cooling of installed components, with the use of perforated doors further improving cooling performance. The removable side panels and doors facilitate maintenance and inspection of devices. The brush strips at cable entry points protect cables from mechanical stress and prevent dust ingress.
Protection Rating and Operating Conditions
The protection rating of the enclosure is IP20, meaning it is protected against solid objects larger than 12.5 mm, but not waterproof. The enclosure is intended exclusively for indoor use. The surface is powder-coated, ensuring high corrosion resistance. The construction is designed for use in IT infrastructures where high mechanical loads and flexible cabling are required.