DIGITUS DN-19 36U-6/6-B-1, EAN: 4016032332305

DIGITUS DN-19 36U-6/6-B-1 enclosure 36HE black

19 Inch-Technology > Rack Cabinets > Racksystems 31+HE

DIGITUS DN-19 36U-6/6-B-1 enclosure 36HE black

Lieske Part No. 373599
Mfg Part No DN-19 36U-6/6-B-1
EAN-Code 4016032332305
Manufacturer DIGITUS
Here only 945,37 EUR
1.124,99 EUR incl. VAT

Further information for DIGITUS DN-19 36U-6/6-B-1 enclosure 36HE black

General
Number of height units36
Modular spacing482,6 mm
Degree of protection (IP)IP20
MaterialSteel
Surface coatingPowder coating
ColourBlack
RAL-number9005
Load capacity of profile rails1200 kg
Number of doors2
Type of ventilationPassive
Type of profile railCrank
Mounting levelFront and rear
Application areaIndoor
Door typeGlass
Lock typeprofile half-cylinder lock type 333
With front doorYes
With backside doorYes
With sidewallYes
With roof plateYes
DemountableYes
Swivel handleYes
Modular base chassisYes
Removable blank platesYes
Cable entries with brushesYes
Roof preparation for fan unitYes
Removable coverYes
The DIGITUS network enclosure DN-19 36U-6/6-B-1 from the Unique Series is a 36 U floor-standing enclosure designed for use in IT infrastructures. It combines robust construction with flexible cabling options and is intended for indoor use. Dimensions are 1787 mm height, 600 mm width, and 600 mm depth, with a rack pitch of 482.6 mm (19 inch). The enclosure is powder-coated in black (RAL 9005) and made of steel sheet with a thickness of up to 1.5 mm, ensuring high mechanical stability. The front door is equipped with a swing handle, designed for mounting a half cylinder lock (type 333). Doors and side panels are modular and removable, improving accessibility to installed components. Door hinge reversal is possible to adapt to different installation locations.

Applications
This enclosure is primarily designed for housing network and server components. It is suitable for cabling and installation of IT systems in data centers, server rooms, or office IT environments. Due to the high load capacity of the profile rails (up to 1200 kg), it can also be used for heavier equipment. The construction allows use as a server rack, especially when perforated doors are installed to improve passive cooling. The preparation for fan units on the roof enables integration of active cooling if required.

Functions and Equipment in Detail
The interior features two pairs of crimped, galvanized 483 mm (48,3 cm ( 19 inch )) profile rails, which are continuously adjustable in depth and connected to the enclosure via additional depth braces. Height units are labeled on both sides, facilitating precise device positioning. The base chassis is modular and openable, with removable 48,3 cm ( 19 inch ) blanking plates enabling flexible use. Large cable entries with brushes are integrated in the base and rear, ensuring clean and flexible cable routing. Rear brush strips above and below the rear door (from 26 U) support cabling in various application scenarios. Vertical cable routing ducts with a cover are integrated on the front side (from 800 mm enclosure width) to optimize cable management.

Technology Explained Simply
The construction from 1.5 mm thick steel sheet ensures high mechanical load capacity and stability. The electrostatic powder coating in black (RAL 9005) provides uniform surface quality and corrosion protection. The profile rails with a load capacity of up to 1200 kg allow mounting of heavy equipment. The modular design with removable side panels and doors simplifies maintenance and installation. Integrated brush strips and cable entries ensure orderly and interference-free cable routing. The roof is prepared for mounting a fan unit and a removable cover, improving cooling and ventilation of the enclosure contents.

Compatibility and Accessories
The enclosure is compatible with various accessories for optimal use. These include, for example, drawers (3 U, 483 mm, black, lockable), shelf bases (1 U, 2 U, various dimensions and load capacities, black or gray), wall mounts for patch panels (8 U and 4 U, black), insert ventilation units (2 or 4 fans, gray or black), patch panels (e.g., 24-port Cat6a shielded, light gray; 48-port Cat6 unshielded, black), roof fan units (2 or 4 fans, gray or black), and plinths (100x600x600 mm, gray). These components can be added as needed to extend the functionality of the enclosure.

Mounting and Installation
The enclosure is delivered pre-assembled and ready for immediate use. However, it is fully disassemblable if transport or installation adjustments are required. The modular construction allows flexible adaptation to the specific installation site. Doors and side panels can be removed to facilitate access to internal components. The profile rails are continuously adjustable, allowing precise positioning of devices. Integrated brush strips and cable entries support clean and structured cabling.

Operational Advantages
The enclosure offers high load capacity, flexible cable routing, and robust construction suitable for long-term use in IT environments. The modular design and the option to mount fan units ensure optimal cooling and accessibility. The powder-coated surface is durable and resistant. The preparation for various accessories allows individual adaptation to specific requirements. The protection rating IP20 ensures protection against foreign objects larger than 12.5 mm, although the enclosure is not waterproof. The front door is equipped with a swing handle and a half cylinder lock (type 333), enabling secure access control. Doors and side panels are removable, simplifying maintenance and installation.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/373599
qrcode für DIGITUS DN-19 36U-6/6-B-1 enclosure 36HE black