DIGITUS DN-19 36U-6/8-1, EAN: 4016032332312

DIGITUS DN-19 36U-6/8-1 Network Cabinet 36HE gray

Networks > Accessories > Housing

DIGITUS DN-19 36U-6/8-1 Network Cabinet 36HE gray

Lieske Part No. 521902
Mfg Part No DN-19 36U-6/8-1
EAN-Code 4016032332312
Manufacturer DIGITUS
Here only 1.016,17 EUR
1.209,24 EUR incl. VAT

Further information for DIGITUS DN-19 36U-6/8-1 Network Cabinet 36HE gray

General
Number of rack units36 HE
Mounting depth min.363 mm
Maximum depth of installation543 mm
Modular spacing482,6 mm
Degree of protectionIP20
Load capacity1200 kg
MaterialSteel
Surface coatingPowder-coated
ColourGrey
RAL-number7035
Front doorsafety glass with metal frame
Rear doorsingle-leaf
Side wallsmodular, lockable and removable
Cable entrySlidable in floor, brush strips at rear
DIN rail483 mm (19 inch), flanged, galvanized, continuously adjustable
Depth bracesBuilt-in
Roofprepared for fan unit, removable cover with ventilation slots
Leveling feet4 pieces, already installed
Installation kitIncluded (screws, cage nuts, washers)
Locking systemSwivel handle with profile half-cylinder lock (adapter included)
Door opening angle120°
Locking1-point locking on all doors
Grounding pointsVarious in cabinet
DisassemblabilityJa
The DIGITUS network enclosure DN-19 36U-6/8-1 from the Unique Series is a 36 U network enclosure designed for use in IT infrastructures, featuring maximum stability and flexible cable routing. It features a robust steel construction made of up to 1.5 mm thick steel sheet, coated with an electrostatic powder coating in grey (RAL 7035). Dimensions are 1787 mm height, 600 mm width, and 800 mm depth, with component installation depth ranging between 363 mm and 543 mm. The enclosure is designed for indoor use and offers protection class IP20, meaning protection against foreign objects larger than 12.5 mm, but no water tightness. The front door consists of safety glass with side metal braces and is equipped with a swing handle designed for mounting a half cylinder lock (adapter included). The rear features a single-leaf door, and all doors are fitted with a 1-point locking system. The side panels are modular, lockable, and removable, improving accessibility and installation. Door hinge reversal is possible.

Applications
This enclosure is designed for installing active and passive network components in IT infrastructures. It is suitable for cabling in data centres, server rooms, or office environments. Due to its construction, it can also be used as a server rack, especially when perforated steel sheet doors are installed to improve passive cooling. The disassemblable design allows transportation into hard-to-reach rooms.

Functions and Equipment in Detail
The enclosure features two pairs (4 pieces) of crimped, galvanised 483 mm (19 inch) profile rails, which are continuously adjustable in depth and marked with height units. These rails are connected to depth braces within the enclosure to ensure stable mounting of components. The maximum load capacity of the profile rails is 1200 kg. The base includes an insertable cable entry with foam rubber gasket, enabling clean cable routing. Enclosures from 26 U are equipped with rear cable entries featuring brush strips above and below the rear door. For enclosures with 800 mm width or more, additional vertical cable routing ducts with covers are installed on the left and right sides of the profile rails on the front. The roof is prepared for mounting a fan unit and features a removable cover with ventilation slots for improved air circulation.

Technology Explained Simply
The 483 mm (19 inch) profile rails serve as the mounting base for standard IT components such as switches, routers, or servers. Galvanisation protects against corrosion, and continuous adjustability allows flexible adaptation to different device heights. Depth braces provide additional stability, especially for deep devices. Brush strips at the cable entries prevent dust ingress and prevent cables from falling out. The powder coating offers high mechanical and chemical resistance. The IP20 protection class is sufficient for indoor use, as there is no risk of water exposure or small foreign objects.

Compatibility and Accessories
The enclosure is compatible with a wide range of accessories, including shelf floors, patch panels, insert fan units, cable routing panels, and mounting kits. The modular construction allows adaptation to specific requirements. The enclosure is delivered fully assembled, including 4 levelling feet already installed under the enclosure, and an installation set (screws, cage nuts, washers). The enclosure structure is disassemblable, allowing installation in confined spaces.

Mounting and Installation
The enclosure is immediately ready for use, as it is delivered fully assembled. Device mounting is done via the 483 mm (19 inch) profile rails, which are continuously adjustable. Doors can be removed to facilitate access to devices. Door hinge reversal is possible to optimise installation at different locations. Levelling feet enable level placement on uneven floors.

Operational Advantages
The robust steel construction and high load capacity ensure long service life and secure mounting. Flexible cable routing with brush strips and vertical ducts simplifies cabling and maintenance. The modular design with removable side panels and doors improves accessibility. Preparation for fan units and integrated ventilation slots support efficient cooling of installed components. Delivery fully assembled reduces installation effort.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/521902
qrcode für DIGITUS DN-19 36U-6/8-1 Network Cabinet 36HE gray