removable cable entry in base with foam rubber seal
Rear cable entries
With brush strips above and below rear door (from 26HE)
Roof
With stepped cover and ventilation slots, prepared for fan unit
Degree of protection
IP20
Delivery condition
Fully assembled
Included
4 pieces levelling feet, installation set (screws, cage nuts, washers)
Disassemblability
The DIGITUS network enclosure DN-19 36U-6/6-1 from the Unique Series is a 36 U floor-standing enclosure with dimensions of 1787 mm height, 600 mm width, and 600 mm depth, finished in grey (RAL 7035). It is designed for use in IT infrastructures where high stability and flexible cabling solutions are required. The enclosure is constructed from a robust steel frame made of up to 1.5 mm thick steel sheet, coated with an electrostatic powder coating to prevent corrosion and ensure uniform surface quality. The front door is a glass door with side metal braces, providing clear visibility into the enclosure, while the rear is equipped with a single-leaf door. Both doors open 120° and are fitted with a 1-point locking system. The locking system includes a swing handle, prepared for mounting a half cylinder lock (type 333), with the adapter already included in the delivery scope.
Applications
This enclosure is intended for indoor use and is suitable for housing network and server components. Due to its construction and the option to install perforated doors, it can also be used as a server rack, with passive cooling supported by ventilation slots in the roof and sides. The disassemblable design allows for flexible installation even in hard-to-reach locations.
Functions and Equipment in Detail
The enclosure features two pairs (4 pieces) of crimped, galvanised 483 mm (19 inch) profile rails mounted on the front and rear. These are infinitely adjustable in depth and marked with height units readable in both directions. The rails are connected to additional depth braces within the enclosure to ensure high stability when mounting components. The maximum load capacity of the profile rails is up to 1200 kg. The base chassis is modular and openable, with removable 48,3 cm ( 19 inch ) blanking plates that enable flexible cable routing. The base includes a sliding cable entry with foam rubber gasket, ensuring clean and damage-free cable routing.
Technology Explained Simply
Cable management is supported by several features: cable entries with brush strips are integrated in the base and rear (from 26 U), enabling dust-tight and flexible cabling. For enclosures 800 mm wide and above, additional vertical cable routing ducts with front-side covers (left and right of the profile rails) are available, structuring cabling inside the enclosure. The roof is fitted with a stepped lid featuring ventilation slots for improved air circulation and is also prepared for mounting a fan unit. The protection rating IP20 safeguards the enclosure against foreign objects larger than 12.5 mm, although it is not waterproof.
Compatibility and Accessories
The enclosure is compatible with various accessories that extend its functionality. These include shelf trays in different configurations (e.g. 1 U, 2 U), blanking plates (blanking covers), cable management panels, patch panels (e.g. Cat5e, Cat6a), mounting kits, castors, drawers, socket strips, and insert ventilation units.
Installation and Mounting
The enclosure is delivered fully assembled and ready for immediate use. However, it can be completely disassembled if needed, to be placed in narrow or hard-to-reach locations. Installation is carried out using an installation kit containing screws, cage nuts, and washers. The side panels are removable and lockable, improving accessibility for maintenance work. Door hinge reversal is possible to optimise installation at different locations. The delivery includes 4 levelling feet already installed under the enclosure to ensure a level standing surface.
Operational Advantages
The enclosure offers high load capacity, flexible cable routing, and a robust construction suitable for professional use in IT infrastructures. The modular design and various mounting options allow adaptation to different requirements. Integrated ventilation elements and preparation for fan units support efficient cooling of installed components. The powder-coated surface ensures long service life and an attractive appearance.