DIGITUS DN-19 22U-6/6-B-1, EAN: 4016032332220

DIGITUS DN-19 22U-6/6-B-1 Rack Cabinet 22U black

19 Inch-Technology > Rack Cabinets > Racksystems 21-30HE

DIGITUS DN-19 22U-6/6-B-1 Rack Cabinet 22U black

Lieske Part No. 572658
Mfg Part No DN-19 22U-6/6-B-1
EAN-Code 4016032332220
Manufacturer DIGITUS
Here only 732,05 EUR
871,14 EUR incl. VAT

Further information for DIGITUS DN-19 22U-6/6-B-1 Rack Cabinet 22U black

General
Degree of protectionIP20
ColourBlack
RAL-number9005
Number of rack units22 HE
Front doorGlass door
Rear doorsingle-leaf
Side wallsLockable and removable
DIN rail483 mm (19 inch), flanged, galvanised
Load capacity1200 kg
Materialsteel sheet
Surface coatingPowder-coated
Door locking mechanism1-point locking
Cable entryslidable with foam rubber seal
RoofWith stepped lid and ventilation slots
Delivery conditionFully assembled
Included4 levelling feet, installation set (screws, cage nuts, washers)
DisassemblabilityJa
The DIGITUS network enclosure DN-19 22U-6/6-B-1 from the Unique Series is a 22 U floor-standing enclosure with dimensions of 1164 mm height, 600 mm width and 600 mm depth, finished in black (RAL 9005). It is designed for use in IT infrastructures where stable mounting of 19-inch components and flexible cabling are required. The enclosure is made of sheet steel with a maximum thickness of 1.5 mm and features an electrostatic powder coating, ensuring high mechanical stability and corrosion protection. The front door is a glass door with side metal braces, equipped with a swing handle and a half cylinder lock, including a key type 333. The rear features a single-leaf door, and both front and rear doors open at an angle of 120°. The doors are fitted with a 1-point locking system, and the side panels are modular, lockable and removable, improving accessibility for maintenance and installation. A door hinge reversal is possible to optimize mounting at different locations.

Applications

The enclosure is suitable for indoor use and is designed for mounting network and server components. It can also be used as a server rack, particularly when considering the heat generation and weight of installed components. The construction allows for flexible use in various IT environments, such as data centres, server rooms or office IT infrastructures. The preparation for mounting fan units on the roof, along with integrated cable entries, supports efficient cooling and cabling.

Functions and equipment in detail

The enclosure features two pairs (4 pieces) of crimped, galvanized 483 mm (19 inch) profile rails mounted on the front and rear. These rails are continuously adjustable in depth and marked with height units readable in both directions. The rails are connected to additional depth braces within the enclosure to enable intensive mounting of 19-inch components. The base chassis is modular and openable, with removable 19-inch blanking panels, allowing flexible cable routing. The base includes an integrated, slide-in cable entry with a foam rubber seal, ensuring clean and protected cable installation.

Technology explained simply

The construction of the enclosure is designed for high stability, with the use of 1.5 mm thick sheet steel and galvanized profile rails ensuring mechanical strength. The powder coating in black (RAL 9005) provides uniform surface quality and resistance to wear. The 19-inch profile rails allow mounting of standard IT components, with continuous adjustability enabling flexible adaptation to different device heights. The integrated cable entries with brush strips (from 26 U rear) and vertical cable routing channels (from 800 mm width) support structured and orderly cabling. The roof features a stepped cover with ventilation slots for improved air circulation and is prepared for mounting a fan unit.

Compatibility and accessories

This includes shelf trays in various heights and colours, drawers, cable management panels, patch panels, blanking plates, fan units, cable management brackets, routing panels, equipotential bonding rails, mounting kits and castors. These accessories support individual adaptation of the enclosure to specific requirements, such as cabling, cooling or security. The installation of perforated sheet metal doors can improve passive cooling, which is particularly beneficial for server applications.

Mounting and installation

The enclosure is delivered fully assembled and ready for immediate use. However, it can be completely disassembled if required to reach difficult installation sites. The delivery includes 4 levelling feet mounted under the enclosure, as well as an installation set with screws, cage nuts and washers. The modular construction with removable side panels and doors facilitates installation and maintenance. The front door can be adjusted with a hinge reversal to optimize mounting at different locations.

Advantages in operation

The enclosure offers high mechanical stability and flexible cable routing, simplifying cabling in IT infrastructures. The modular construction with removable doors and side panels improves accessibility, while integrated cable entries and cable routing channels enable structured cabling. The preparation for fan units on the roof supports efficient cooling, especially under high loads. The robust steel construction and powder coating ensure long service life and resistance to wear. The delivery fully assembled with an installation set simplifies installation and reduces effort for the user.

Protection rating

The protection rating of the enclosure is IP20, meaning it is protected against ingress of foreign objects larger than 12.5 mm, but not waterproof. The enclosure is intended for indoor use and not suitable for outdoor environments.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/572658
qrcode für DIGITUS DN-19 22U-6/6-B-1 Rack Cabinet 22U black