DIGITUS DN-19 20U-6/6, EAN: 4016032205975

DIGITUS DN-19 20U-6/6 Wall Mount Enclosure 20HE gray

19 Inch-Technology > Accessories/Equipment > Shelves

DIGITUS DN-19 20U-6/6 Wall Mount Enclosure 20HE gray

Lieske Part No. 829728
Mfg Part No DN-19 20U-6/6
EAN-Code 4016032205975
Manufacturer DIGITUS
Here only 539,18 EUR
641,62 EUR incl. VAT

Further information for DIGITUS DN-19 20U-6/6 Wall Mount Enclosure 20HE gray

General
Number of rack units20 HE
ColourGrey RAL 7035
Materialsteel sheet
Sheet metal thicknessup to 1.5 mm
Surface coatingElectrostatic powder coating
Hinge positionAdjustable
Door opening angle210 degree
Cable entriesrear panel, floor, roof
Cable entry roofslidable with foam rubber seal
DIN rail2 pairs, 483 mm (19"), depth adjustable
Rail markingdouble-sided readable height units
Side panelsLockable and removable
Front doorLockable safety glass door with steel frame
Fan installationRoof prepared for fan module
Mounting methodWall mounting, optionally freestanding with levelling feet or casters
Scope of deliverywall enclosure, installation kit
The DIGITUS wall-mounted enclosure DN-19 20U-6/6 belongs to the Unique Series and is designed as a 20 U network enclosure for wall mounting. It is intended for the secure and structured installation of IT and network devices in 19-inch format. The enclosure is made of robust steel sheet, with a thickness up to 1.5 mm, providing a stable construction for use in IT infrastructures. The surface is coated with electrostatic powder paint in grey (RAL 7035), ensuring high resistance to wear and corrosion.

Applications
This wall-mounted enclosure is suitable for use in offices, server rooms, data centres, or other IT environments where compact and secure wall mounting of network devices is required. The 20 height units provide sufficient space for routers, switches, firewalls, and other 19-inch components. The modular design allows for flexible use, even in rooms with limited space.

Functions and Equipment in Detail
The enclosure features a lockable safety glass door with a steel frame, enabling secure access to installed devices. The side panels are also lockable and removable, improving accessibility and maintenance of the devices. A door hinge reversal is possible to adapt the installation to different wall configurations. The door opens up to 210 degrees, allowing unobstructed access to the devices. The rear panel and base sheet are equipped with punched cable entries, covered with plastic caps. The roof includes a sliding cable entry with a foam rubber seal, enabling clean and sealed cable routing. Additionally, the roof is prepared for the installation of a fan module.

Technology Explained Simply
Inside, two pairs of galvanised 483 mm (48,3 cm ( 19 inch )) profile rails are mounted, adjustable in depth. These rails are marked with height units readable on both sides, facilitating precise device positioning. The rails allow mounting of devices in standard 19-inch dimensions. Wall mounting is performed in two steps: first, the rear panel is attached to the wall, then the enclosure is connected to the rear panel. The construction is designed to also be used freestanding if optional levelling feet or castors are installed.

Compatibility and Accessories
The enclosure is designed for mounting 19-inch components and is compatible with standard network devices. It can be supplemented with various accessories, such as blanking panels, cable management brackets, patch panels, component shelves, cable routing panels, mounting kits, fan units, and insert ventilation units. These components support structured cabling and optimal air circulation within the enclosure.

Installation and Mounting
Installation is carried out on the wall in two simple steps: the rear panel is fixed to the wall, then the enclosure is connected to the rear panel. The use of levelling feet or castors enables freestanding installation. The delivery includes the wall-mounted enclosure and an installation set required for mounting.

Operational Advantages
The modular and lockable construction provides a high security standard. The depth-adjustable profile rails and various cable entries enable flexible and neat cabling. The robust steel construction ensures long service life and high stability. The possibility to use the enclosure freestanding increases application flexibility. The powder coating in grey (RAL 7035) ensures a professional appearance and high resistance to environmental influences.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/829728
qrcode für DIGITUS DN-19 20U-6/6 Wall Mount Enclosure 20HE gray