DIGITUS DN-19 20-U-3, EAN: 4016032190820

DIGITUS DN-19 20-U-3 Wall Mount Enclosure 20HE gray

19 Inch-Technology > Rack Cabinets

DIGITUS DN-19 20-U-3 Wall Mount Enclosure 20HE gray

Lieske Part No. 310744
Mfg Part No DN-19 20-U-3
EAN-Code 4016032190820
Manufacturer DIGITUS
Here only 663,03 EUR
789,01 EUR incl. VAT

Further information for DIGITUS DN-19 20-U-3 Wall Mount Enclosure 20HE gray

General
Degree of protectionIP40
Height of housing998 mm
Housing depth600 mm
Housing width600 mm
Frame height20 HE
Material thickness1,5 mm
ColourGrey
Colour codeRAL 7035
Door opening angle210 degree
Swivel angle102 degree
Front doorSafety glass with steel frame
Side panelsLockable and removable
Cable entryslidable cable entry with foam rubber seal in roof
Brush barsAt top and bottom of rear frame
Fan installationprepared by punching in roof chassis
DIN rail2x galvanised 483 mm (19") rails, marked on both sides, adjustable in depth
Rear mounting holes483 mm (19")-pitch
Mounting methodWall mounting, optionally freestanding with feet or castors
Scope of deliveryDIGITUS 20HE wall enclosure, swivel 998x600x600, installation kit
The DIGITUS wall-mounted enclosure DN-19 20-U-3 from the Unique series is a 20 U network enclosure for wall mounting, designed for use in IT infrastructures with high requirements for stability and accessibility. The enclosure is made of a robust steel construction with a material thickness of up to 1.5 mm and is powder-coated in grey (RAL 7035), ensuring high mechanical strength and corrosion protection. Dimensions are 998 mm height, 600 mm depth, and 600 mm width. The two-piece design enables flexible installation: the frame is mounted to the wall, and then the enclosure is connected to it. The front door is lockable and made of safety glass with a steel frame, ensuring a secure access control system. The side panels are also lockable and removable, facilitating maintenance and installation of components. A door hinge reversal is possible, allowing the door to open in both directions. The door opens up to 210 degrees, providing good visibility into the interior.

Applications
This wall-mounted enclosure is designed for use in offices, server rooms, technical rooms, or other environments where a compact, wall-mounted solution is required for housing network and IT components. It is suitable for mounting active and passive devices such as switches, routers, modems, patch panels, or other 48,3 cm ( 19 inch ) components. The swivel construction with a 102-degree opening angle on the frame facilitates installation and maintenance in the rear area of the enclosure, as the enclosure can be folded to the side. This is particularly advantageous when installing cables or devices in the rear section.

Functions and Equipment in Detail
Inside, two galvanized 483 mm (48,3 cm ( 19 inch )) profile rails with height markings readable on both sides are installed, which can be adjusted in depth. This allows flexible adaptation to different device heights and depths. The rear frame features an additional 48,3 cm ( 19 inch ) mounting pattern, providing extended mounting options. In the enclosure roof, there is a sliding cable entry with foam rubber gasket, enabling clean and sealed cable routing. Additionally, punched cable entries with plastic covers are integrated in the rear panel and base plate. Brush strips on the top and bottom of the rear frame ensure orderly and dust-free cable passage. The roof is prepared with a corresponding cutout for installing a fan module.

Technology Explained Simply
The steel sheet construction with a thickness of up to 1.5 mm provides high mechanical stability and protects installed devices from mechanical impacts. The electrostatic powder coating in grey (RAL 7035) ensures a uniform, durable surface resistant to dirt and corrosion. The swivel mounting allows easy access to the rear area of the enclosure, which is beneficial for cable and device installation and maintenance. The lockable front door and side panels increase the security of installed components. The 48,3 cm ( 19 inch ) profile rails with height markings enable precise and flexible mounting of devices in standard IT dimensions.

Compatibility and Accessories
The enclosure is designed for mounting standard 48,3 cm ( 19 inch ) components. Compatible accessories include, for example, patch panels (e.g. 24-port Cat6a shielded, 24-port Cat5e unshielded), cable management panels, blanking panels, shelf dividers, fan units, and mounting kits. The use of optional levelling feet or castors allows for freestanding installation of the enclosure. The combination with fan modules is possible due to the pre-cut opening in the roof chassis.

Mounting and Installation
Wall mounting is carried out in two steps: first, the frame is mounted to the wall in the desired opening direction, then the enclosure is connected to the frame. The swivel construction allows flexible adaptation to spatial conditions. The 48,3 cm ( 19 inch ) rails are adjustable in depth, allowing device positioning to match the depth of installed components.

Operational Advantages
The modular construction with lockable and removable side panels and front door improves accessibility and simplifies maintenance. The integrated cable entries and brush strips ensure orderly and clean cable routing, simplifying maintenance and fault diagnosis. The robust steel construction ensures long service life and high stability. The option to operate the enclosure freestanding with optional feet or castors increases operational flexibility. The powder-coated surface in grey (RAL 7035) blends visually into most technical environments.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/310744
qrcode für DIGITUS DN-19 20-U-3 Wall Mount Enclosure 20HE gray