DIGITUS DN-19 12-U-S-1, EAN: 4016032330967

DIGITUS DN-19 12-U-S-1 Wall Mount 12HE gray

19 Inch-Technology > Rack Cabinets > Wallmount Racks

DIGITUS DN-19 12-U-S-1 Wall Mount 12HE gray

Lieske Part No. 276050
Mfg Part No DN-19 12-U-S-1
EAN-Code 4016032330967
Manufacturer DIGITUS
Here only 136,56 EUR
162,51 EUR incl. VAT

Further information for DIGITUS DN-19 12-U-S-1 Wall Mount 12HE gray

General
Degree of protectionIP 40
ColourGrey
Colour codeRAL 7035
Height of housing12 HE
Housing width483 mm
Housing depth400 mm
Total housing height595 mm
Total housing width540 mm
Sheet steel thickness1,5 mm
Surface coatingElectrostatic powder coating
Door typefull glass door
Door functionLockable
Cable entryBrushes in top and bottom
DIN rail2 pairs galvanised, adjustable in depth
Mounting methodWall mounting
Delivery conditionunmounted in Flat-Pack
Accessories included in delivery8x mounting screw set
VentilationVentilation slots for passive and active ventilation
The DIGITUS wall-mounted enclosure DN-19 12-U-S-1 is a 12 U model of the SOHO series, specifically designed for wall mounting. It is intended for the distribution and setup of small to medium-sized IT networks in offices, home applications, or small businesses. The enclosure is delivered disassembled in flat-pack, enabling cost-efficient and space-saving logistics. Assembly is completed in a few steps and is supported by an included step-by-step instruction manual.

Applications
This wall-mounted enclosure is designed for use in IT infrastructures requiring compact, secure, and well-ventilated mounting of network devices. It is suitable for installing switches, routers, modems, patch panels, and other 19-inch components. Wall mounting makes it particularly suitable for spaces with limited floor area, such as small offices, apartments, or the rear of workstations.

Functions and Equipment in Detail
The enclosure features a lockable full-glass door, ensuring secure access to installed components while providing clear visibility of the devices. The door can be reversed in its hinge direction, allowing flexible mounting at various wall positions. Cable entry is facilitated via brushes in the roof and base, supporting organized and dust-reduced cabling. The interior of the enclosure is equipped with two pairs of galvanized 19-inch profile rails, marked with readable height units and adjustable in depth. This allows flexible positioning of devices within the enclosure.

Technology Explained Simply
The enclosure is constructed from a robust steel structure made of up to 1.5 mm thick steel sheet, protected by electrostatic powder coating in grey (RAL 7035). The coating ensures high mechanical stability and corrosion resistance. Optimal ventilation is supported by ventilation slots in the enclosure body, enabling both passive and active cooling. The protection rating IP 40 safeguards against entry of solid foreign objects with a diameter greater than 1 mm, providing protection against dust and contact. Dimensions are 595 mm (height) × 540 mm (width) × 400 mm (depth), with the width conforming to the 19-inch standard (483 mm). Wall mounting is achieved using the included mounting screws, which are part of the delivery scope.

Compatibility and Accessories
The wall-mounted enclosure is designed for mounting standard 19-inch components. These can be supplemented as needed to enhance the functionality and security of the enclosure. The use of accessories such as shelf trays or fan units can optimize load distribution and cooling performance.

Assembly and Installation
Assembly is carried out on a suitable wall surface, using the designated mounting points and the included screws. The step-by-step instruction manual simplifies the setup. The profile rails are pre-installed in the enclosure and can be adjusted in depth to optimally position the devices. The glass door is attached after installing the devices and can be locked.

Advantages in Operation
The wall-mounted enclosure provides a compact and secure solution for mounting IT components. The lockable glass door protects against unauthorized access, while cable entry with brushes enables organized cabling. The robust steel construction and powder coating ensure long service life. Optimal ventilation supports thermal stability of the installed devices. Wall mounting saves floor space and allows flexible placement within the room.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/276050
qrcode für DIGITUS DN-19 12-U-S-1 Wall Mount 12HE gray