| General |
| Degree of protection | IP20 |
| Number of rack units | 12 |
| Application area | Indoor |
| Colour | Grey |
| Length/depth | 600 mm |
| Sheet metal thickness | up to 1.5 mm |
| Door hinge | 1-point locking |
| Door opening angle | 210 degree |
| Swivel angle | 102 degree |
| Cable entry | slidable with foam rubber seal |
| Rear panel | Punched cable entries with plastic cover |
| Bottom plate | Punched cable entries with plastic cover |
| Brush bars | At top and bottom of rear frame |
| DIN rail | 483 mm (19")-galvanised, adjustable in depth |
| Rear frame | 483 mm (19")-pitch |
| Roof chassis | Punched area for fan module |
| Scope of delivery | Installation set with 8 mounting screws |
The DIGITUS DN-19 12-U-3 is a 12 U wall-mounted enclosure from the Unique Series, specifically designed for mounting IT and network components on a wall. The enclosure is made of a robust steel construction with a sheet thickness of up to 1.5 mm and is painted grey (RAL 7035) using electrostatic powder coating. It is built in two parts and features a swing frame that allows the enclosure to be tilted to the side, providing access to the rear area for mounting or maintenance work. The front door is made of safety glass with a steel frame and includes a lockable 1-point locking mechanism. The side panels are also lockable and removable, improving accessibility and maintenance. The door can be opened up to 210 degrees, and the enclosure frame can be swivelled up to 102 degrees.
Applications
This wall-mounted enclosure is designed for indoor use and is suitable for installing active and passive network components. It is particularly suitable for environments requiring a compact, wall-mounted solution for IT infrastructure, such as offices, server rooms, or network device cabling in small spaces. The modular design allows for flexible adaptation to different requirements.
Functions and Equipment in Detail
The enclosure features an integrated hinge in the rear frame, enabling the swivel mechanism. The roof area includes a slide-on cable entry with a foam rubber seal to ensure clean and sealed cable routing. The rear panel and base sheet are equipped with punched cable entries, covered with plastic caps. Additionally, brush strips are mounted at the top and bottom of the rear frame to enable dust-tight and cable-friendly cabling. The roof chassis includes a punched area for mounting a fan module.
Technology Explained Simply
The interior includes a pair of galvanised 483 mm (48,3 cm ( 19 inch )) profile rails, which are depth-adjustable and marked with height units to allow mounting of devices in both directions. The rear frame features a 483 mm (48,3 cm ( 19 inch )) hole pattern, providing additional mounting options. Wall mounting is performed in two steps: first, the frame is attached to the wall, then the enclosure is connected to the frame. Mounting can be done in any opening direction. Optionally, levelling feet or castors can be used to operate the enclosure freestanding.
Compatibility and Accessories
The enclosure is compatible with various accessories that ensure optimal use. These include, for example, insert ventilation units with 2 or 4 fans, roof fan units, patch panels in various port counts and configurations (e.g. 24-port Cat6 shielded, 48-port Cat6 unshielded), blanking panels, shelf floors, cable management brackets, routing panels, mounting kits, and an equipotential bonding bar. These components allow individual adaptation to the specific requirements of the network infrastructure.
Mounting and Installation
Mounting is done on a wall in two steps: the frame is attached to the wall, then the enclosure is connected to the frame. Installation is simple and does not require special tools. The installation kit, included in the delivery, contains 8 mounting screws for securing the frame to the wall. These screws are suitable for the 48,3 cm ( 19 inch ) profile rails.
Operational Advantages
The enclosure offers high accessibility through lockable and removable side panels as well as the swivelling front door. The integrated cable entries and brush strips ensure orderly and dust-tight cabling. The robust steel construction ensures high stability and durability. The modular design allows flexible adaptation to different requirements. The protection class IP20 protects against foreign objects larger than 12.5 mm, although the enclosure is not waterproof.
Protection Rating
The protection rating IP20 means the enclosure is protected against ingress of foreign objects with a diameter greater than 12.5 mm. It is not waterproof and not suitable for outdoor use. The protection rating is designed for indoor environments where no direct moisture or dampness is expected.
Delivery Contents
The product is delivered with an installation kit containing 8 mounting screws for wall mounting. These screws are intended for securing the frame to the wall and are compatible with the 48,3 cm ( 19 inch ) profile rails inside the enclosure.