DIGITUS DN-19 09-U-3, EAN: 4016032186731

DIGITUS DN-19 09-U-3 wall enclosure 9HE grey

Networks > Accessories > Housing

DIGITUS DN-19 09-U-3 wall enclosure 9HE grey

Lieske Part No. 520056
Mfg Part No DN-19 09-U-3
EAN-Code 4016032186731
Manufacturer DIGITUS
Here only 432,82 EUR
515,06 EUR incl. VAT

Further information for DIGITUS DN-19 09-U-3 wall enclosure 9HE grey

General
Protection classIP20
Number of rack units9
Application areaIndoor
ColourGrey
Colour codeRAL 7035
Materialsteel sheet
Steel sheet thicknessup to 1.5 mm
Surface coatingElectrostatic powder coating
Door locking1-point locking
Door opening angle210 degree
Swivel angle housing102 degree
Cable entry roofslidable with foam rubber seal
Cable entries rear panel and basepunched with plastic cover
Brush barsAt top and bottom of rear frame
DIN railgalvanised, 483 mm (19")
Adjustability of profile railsin depth
Rear panel perforation483 mm (19")
Side panelsLockable and removable
Front doorLockable safety glass door with steel frame
Wall mountingin two working steps
Freestanding usewith optional levelling feet or castors
Scope of deliverywall enclosure, installation kit
Installation kitincluding 8 mounting screws
The DIGITUS wall-mounted enclosure DN-19 09-U-3 from the Unique series is a 9 U network cabinet for wall mounting, designed for use in IT infrastructures. The enclosure features a two-part construction with a swing frame, allowing it to be folded to the side when needed to provide access to the rear area for installation or maintenance work. The robust steel construction is made of up to 1.5 mm thick steel sheet and is protected by electrostatic powder coating in grey (RAL 7035). The front door is made of safety glass with a steel frame and features a lockable 1-point locking mechanism. The side panels are also lockable and removable, enhancing accessibility and serviceability. A door hinge change is possible to adjust the opening direction.

Applications
This wall-mounted enclosure is designed for indoor use and is suitable for housing active and passive network components. The construction allows for stable wall mounting in two steps: the frame is attached to the wall, and then the enclosure is connected to the frame. Optionally, levelling feet or castors can be used to operate the enclosure freestanding.

Functions and equipment in detail
Inside, galvanised 483 mm (48,3 cm ( 19 inch )) profile rails are installed, which are depth-adjustable and marked with height units for reading in both directions. The cabinet roof features a slide-on cable entry with a foam rubber seal, while the rear panel and base sheet have punched cable entries with plastic covers. Additionally, brush strips are integrated at the top and bottom of the rear frame to support efficient air circulation. The roof chassis includes a punched area for mounting a fan module.

Technology explained simply
The protection class IP20 protects against foreign objects larger than 12.5 mm, but the enclosure is not waterproof. The maximum door opening angle is 210 degrees, while the enclosure frame can be swivelled up to 102 degrees. Dimensions are 509 mm height, 600 mm depth, and 600 mm width. The colour is grey (RAL 7035), with the surface protected against corrosion by powder coating. The construction is designed for high load capacity and provides a stable platform for IT components.

Compatibility and accessories
The enclosure is compatible with various accessories, including fan units such as the roof fan unit for wall-mounted enclosure with 2 fans in grey or black, as well as insert fan units. Patch panels such as the 1 U 24-port Cat6 shielded grey or the 0.5 U 24-port Cat6 unshielded black can also be integrated. Cable management brackets in 1 U and 2 U versions, as well as blanking plates in various heights, are also available. Cable routing panels and shelf panels extend the mounting options.

Installation and mounting
Wall mounting is carried out in two simple steps: first, the frame is attached to the wall, then the enclosure is connected to the frame. The delivery includes the wall-mounted enclosure and an installation set required for mounting. Mounting is done using M6 screws, with the set including 8 mounting screws.

Operational advantages
The swing construction and removable side panels improve accessibility and simplify installation and maintenance. The integrated cable entries and brush strips support clean and efficient cabling. The robust steel construction ensures long service life and high stability. The powder coating provides uniform surface quality and corrosion protection.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/520056
qrcode für DIGITUS DN-19 09-U-3 wall enclosure 9HE grey