DIGITUS DN-19 07U-6/6, EAN: 4016032190103

DIGITUS DN-19 07U-6/6 Wall Mount Case 7HE gray

Computer Hardware > Server Accessories > 19 Inch Rack Enclosures

DIGITUS DN-19 07U-6/6 Wall Mount Case 7HE gray

Lieske Part No. 338118
Mfg Part No DN-19 07U-6/6
EAN-Code 4016032190103
Manufacturer DIGITUS
Here only 261,72 EUR
311,45 EUR incl. VAT

Further information for DIGITUS DN-19 07U-6/6 Wall Mount Case 7HE gray

General
Degree of protectionIP20
Application areaIndoor
ColourGrey
Colour codeRAL 7035
Height units7 HE
Materialsteel sheet
Steel sheet thicknessup to 1.5 mm
Surface coatingElectrostatic powder coating
Hinge position210 degrees
Door locking1-point locking
Side panelsLockable and removable
Front doorLockable safety glass door with steel frame
DIN rail2 pairs, 483 mm (19")
Cable entrieson rear wall, floor and ceiling
Roof cable entryslidable with foam rubber seal
Fan mountingpunched area in top chassis
Mounting methodWall mounting
Detachedoptional with levelling feet or casters
Scope of deliveryInstallation kit
The DIGITUS wall-mounted enclosure DN-19 07U-6/6 from the Unique series is a 7 U network cabinet for wall mounting, designed for use in IT infrastructures. It features a robust steel construction made of up to 1.5 mm thick steel sheet, ensuring stable fixation to the wall. The surface is coated with electrostatic powder coating in grey (RAL 7035), providing high mechanical durability and uniform colouring. The enclosure is equipped with a lockable safety glass door featuring a steel frame and allowing an access angle of 210 degrees. The side panels are also lockable and removable, improving accessibility for maintenance work. A door hinge change is possible to adapt the installation to different wall configurations.

Applications
This wall-mounted enclosure is designed for indoor use and is suitable for housing active and passive network components. It is particularly suitable for small to medium-sized networks, such as those found in offices, server rooms, or during the installation of network devices on walls. The modular design allows flexible adaptation to different requirements for cabling and device access.

Functions and Equipment in Detail
Inside the cabinet, two pairs of galvanised 483 mm (48,3 cm ( 19 inch )) profile rails are mounted, adjustable in depth. These allow secure mounting of 19-inch components. The rear panel and base sheet are equipped with punched cable entries, covered with plastic caps. On the roof, there is a sliding cable entry with a foam rubber seal, enabling clean and flexible cable routing. Additionally, the roof chassis features a punched area for mounting a fan module. Ventilation slots in the enclosure support air intake and exhaust for active devices.

Technology Explained Simply
The construction from robust steel sheet ensures high mechanical stability and protection for installed devices. The electrostatic powder coating provides a uniform, abrasion-resistant surface. The 19-inch profile rails enable standard mounting of network devices. The adjustable rails allow adaptation to different device heights. Cable entries on the rear panel, base, and roof support structured and orderly cabling. The lockable front door and removable side panels increase security and facilitate maintenance.

Compatibility and Accessories
The enclosure is compatible with various accessories that ensure optimal use. These include fan modules with 2 or 4 fans, patch panels in various port counts and categories (e.g. Cat6, Cat5e), component shelves in different heights and colours, cable management brackets, cable routing panels, and equipotential bonding rails. These components can be added as needed to extend the functionality of the cabinet.

Installation and Mounting
Wall mounting is performed in two steps: first, the rear panel of the enclosure is fixed to the wall, then the enclosure is connected to the rear panel. The installation set is included in the delivery and supports the mounting process. Optionally, levelling feet or castors can be used to operate the enclosure freestanding.

Operational Advantages
The modular and accessible design enables easy installation and maintenance. The lockable doors and side panels increase the security of installed devices. The flexible cable routing and adjustable profile rails ensure optimal adaptation to the specific environment. The robust construction guarantees long service life and reliable operation.

Protection Rating
The enclosure complies with protection class IP20, meaning it is protected against foreign objects larger than 12.5 mm, but is not waterproof. It is intended exclusively for indoor use.

Colour and Surface
The colour is grey (RAL 7035), applied via electrostatic powder coating, providing high mechanical durability and uniform surface quality.

Dimensions
The enclosure has a height of 420 mm, a width of 600 mm, and a depth of 600 mm.

Delivery Contents
The product is delivered with an installation set, which supports wall mounting.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/338118
qrcode für DIGITUS DN-19 07U-6/6 Wall Mount Case 7HE gray