| General |
| Cable type | Fibre optic patch cable |
| Fibre class | Singlemode OS2 |
| Plug combination | SC (APC) / LC (PC) |
| Cable construction | Duplex |
| Cable colour | Yellow |
| Outer casing | LSOH |
| Connector material | ceramic ferrule |
| Cable length | 2 m |
The DIGITUS LWL patch cable DK-292SCA3LC-02 is a duplex fibre optic cable designed for use in networks, particularly in areas such as telecommunications, rack cabling, sensor technology, and industrial applications. It connects an SC (APC) connector to an LC (PC) connector and is designed for singlemode transmission. The cable construction is based on fibre class OS2 with a core diameter of 9 µm and a cladding diameter of 125 µm, suitable for high bandwidth and long transmission distances. The yellow outer jacket identifies the cable as singlemode LWL, which is standard in the industry for high-performance applications.
Applications
The cable is designed for professional network infrastructures where high data rates and low signal loss are required. It is suitable for connections between switches, routers, servers, and other network devices, particularly in data centres, industrial environments, or for sensor cabling. The use of APC (Angled Physical Contact) and PC (Physical Contact) connectors enables optimal light transmission with minimal reflections, improving signal quality.
Features and Equipment in Detail
The patch cable is configured as a duplex cable, meaning it contains two fibres to enable simultaneous transmission in both directions. The connectors are equipped with ceramic ferrules, ensuring precise alignment and high mechanical stability. Packaging is individual in a poly bag, with each cable delivered with a test report documenting the optical properties. The outer jacket is made of LSOH material (Low Smoke Zero Halogen), meaning low smoke emission and no release of halogen-containing gases in case of fire.
Technology Explained Simply
Fibre class OS2 is optimised for singlemode transmission over long distances and is used in modern networks to transmit high data rates over several kilometres. The APC connector at the SC end has an angled polish angle, minimising reflections at the connection point. The LC connector at the other end is polished with PC, also ensuring low back reflection. The combination of SC (APC) and LC (PC) enables flexible connections between different devices using different connector types.
Compatibility and Accessories
The cable is compatible with devices supporting SC (APC) and LC (PC) connectors. It can be used in existing network infrastructures where a connection between a device with an SC connector and a device with an LC connector is required. The use of singlemode fibres requires specific transmitter and receiver modules designed for singlemode transmission.
Installation and Mounting
Installation is performed by simply plugging the connectors into the corresponding sockets of the network devices. The cables are designed for use in racks and enclosures, with a length of 2 metres allowing flexible placement. Packaging with a test report facilitates documentation and quality assurance during installation.
Operational Advantages
The cable provides high signal quality through the use of ceramic ferrules and specific APC and PC polishing. The LSOH outer jacket increases safety in case of fire. Individual packaging with a test report enables traceable quality assurance. The yellow colour facilitates identification as a singlemode cable within the network.