The DIGITUS DK-1644-010 is a CAT 6 S-FTP patch cable, designed for use in modern network infrastructures. It features a copper conductor (Cu) and an LSZH outer jacket, which ensures low smoke and flame propagation in case of fire. The cable construction complies with ISO/IEC 11801 and DIN EN 50173 CAT 6 standards, guaranteeing compliance with Category 6 channel specifications. Performance has been tested up to a frequency of 250 MHz, including parameters such as near-end crosstalk (NEXT), enabling high signal quality and low interference during operation.

Applications
This cable is suitable for use in office and industrial applications where reliable data transmission at high speeds is required. It supports data transmission up to 10 Gbit/s over short distances, with actual bandwidth depending on the network topology and connected devices. The use of S/FTP (Screened/Foiled Twisted Pair) provides effective shielding against electromagnetic interference, which is particularly beneficial in environments with high electromagnetic noise.

Features and Equipment in Detail
The patch cable is equipped with two RJ45 connectors (8P8C), each featuring a transparent-red colored metal shielding. This color coding enables easy identification of Category 6. Each connector is fitted with a molded strain relief boot, providing tension relief and latch protection. This prevents cable snagging and latch breakage, enhancing the cable’s lifespan and reliability.

Technology Explained Simply
The designation S/FTP describes a cable construction where the entire cable structure (S) and each individual pair (FTP) are shielded. This provides a particularly high level of protection against electromagnetic interference. The LSZH outer jacket (Low Smoke Zero Halogen) is flame-retardant and emits minimal smoke and no toxic halogens when heated or during fire, making it suitable for use in enclosed spaces and buildings with high safety requirements. The cable construction with AWG 27/7 (27 AWG, 7 wires per conductor) ensures sufficient conductivity and mechanical stability.

Compatibility and Accessories
The cable is compatible with PoE, PoE+, and PoE++ (IEEE 802.3af, 3at, bt), enabling power delivery over the network cable. This is particularly relevant for devices such as IP cameras, access points, or telephone systems. Use with other network devices supporting the CAT 6 specification is standard-compliant. Compatible accessories, such as mini GBIC (SFP) modules for fiber optic connections, can be used in combination with appropriate switches or routers to extend the network infrastructure.

Installation and Mounting
Installation is performed by simply plugging the RJ45 connectors into the corresponding sockets on switches, routers, or end devices. The strain relief boots facilitate installation by protecting the cable from mechanical stress. The cables are designed for use in cabling systems according to ISO/IEC 11801 and DIN EN 50173, enabling standardized and certified installation.

Operational Advantages
The combination of high shielding, flame-retardant outer jacket, and PoE support makes this cable a robust solution for professional networks. The easy identification via red connector coloring and mechanical stability provided by the strain relief boots reduce installation errors and increase operational safety. Compliance with international standards ensures high quality and interoperability with other network products.

The cable is available in Grey and has a length of 1 Meter.