General
Cable type	U/UTP
Category	6
Type of connector connection 1	RJ45 8(8)
Type of connector connection 2	RJ45 8(8)
Colour outer sheath	Grey
Anti-kink sleeve	Moulded-on
Colour anti-kink sleeve	Grey
Cable construction	4x2
AWG-size	26
Pin assignment	1:1
NVP value	69 %
Locking lever
Fire retardant version
Halogen free
Oil resistant (acc. EN 60811-404)

The DIGITUS Cat6 U/UTP patch cable is a network cable designed for use in IT and telecommunications installations. It connects network devices such as switches, routers, PCs, or network printers over a length of 10 meters. The cable is constructed as U/UTP (unshielded/unshielded twisted pair), meaning neither the individual pairs nor the entire cable is shielded. This design is suitable for environments with low electromagnetic interference, where additional shielding is not required. Category 6 ensures data transmission rates of up to 1000 Mbit/s (Gigabit Ethernet) over the full cable length and supports frequencies up to 250 MHz. The pinout follows the 1:1 standard, meaning direct contact pass-through, which is required for connecting similar devices (e.g., PC to switch).

Applications
This cable is designed for use in offices, server rooms, home networks, and other environments where stable and reliable data transmission over medium distances is required. The grey jacket color allows for discreet integration into existing installations. Use in private households is permitted according to the ElektroG categorization, as the device is classified as a small IT and telecommunications device.

Features and Specifications in Detail
Each cable is equipped with a molded strain relief boot that provides tension relief and reduces mechanical stress on the connector joints. The boot is grey and includes an integrated latch protection to prevent cable snagging and breakage of the RJ45 connector latch. The red coloring of the connectors serves as a visual indicator for Category 6, enabling quick identification in cable management. The connectors are RJ45 8(8), meaning eight contacts and eight conductors, which is the standard for Ethernet connections.

Technical Explanation
The cable construction consists of four pairs (4x2), with each pair made of two individual wires. The AWG cross-section is 26, corresponding to a wire gauge commonly used for Cat6 cables and providing sufficient conductivity for the required data rates. The NVP value (Nominal Velocity of Propagation) is 69%, describing the signal propagation speed in the cable and relevant for calculating signal delays. The cable is flame-retardant and halogen-free (LSZH), meaning it does not release toxic or smoke-intensive gases in case of fire, making it suitable for indoor use. It is not oil-resistant according to EN 60811-404, meaning it is not intended for environments with direct oil contact.

Compatibility and Accessories
The cable is compatible with all devices supporting an RJ45 port and meeting Cat6 standard requirements. It can be used in existing network infrastructures designed for Cat6 or higher. Use with Cat5e devices is also possible, although the maximum bandwidth will be limited by the lower-capability device. No additional accessories or adapters are required, as the connectors are standardized.

Installation and Mounting
Installation is performed by simply inserting the RJ45 connectors into the corresponding ports on the network devices. The strain relief boot ensures the connectors are not damaged by tensile stress. The 10-meter cable length allows flexible device placement within a room or between adjacent rooms. No special tools or additional mounting aids are required.

Operational Advantages
The combination of flame-retardant, halogen-free jacket and strain relief boot enhances cable safety and lifespan. The clear visual marking for Category 6 simplifies cable management. The direct pinout (1:1) ensures simple and error-free connections. The cable is designed for indoor use and meets safety and reliability requirements for IT networks.

Scope of Delivery
The product is delivered as DIGITUS cat.6 U/UTP patch cable, Cu, LSZH, 10m. It is a single cable without additional components or documentation. The delivery includes only the described network cable.