General
Cable standard	Cat 6
Shielding	U-UTP
Connector type	RJ45
Number of connectors	2
Cable structure	4x 2 AWG 26/7, Twisted Pair
Insulating material	PVC
Colour	Grey
Plug colour	transparent red
Frequency range	250 MHz
Norm	ISO/IEC 11801, DIN EN 50173
Tension relief
Bend protection
Locking lever

The DIGITUS DK-1612-010 is a Category 6 patch cable, designed as U-UTP (unshielded, unshielded twisted-pair structure), with a length of 1 metre. It serves as a connection element in network infrastructures and enables data transmission between network devices such as switches, routers, PCs, or network printers. The cable is designed for use in IT and telecommunications installations and complies with the standards ISO/IEC 11801 and DIN EN 50173 for CAT 6. Performance has been validated up to a frequency of 250 MHz, taking into account parameters such as near-end crosstalk (NEXT) to ensure stable and interference-free data transmission.

Applications
This patch cable is suitable for use in office and corporate networks where high data rates and reliability are required. It is used in cabling systems that meet Category 6 requirements, for example in server rooms, workstations, or for connecting network devices. The cable structure with 4 pairs of AWG 26/7 (PVC insulation) ensures sufficient conductivity and mechanical stability. The grey colour supports visual organisation in cable ducts and rack systems.

Functions and Features in Detail
Each cable features two RJ45 connectors (8P8C), equipped with a moulded strain relief boot. This boot provides tension relief to reduce mechanical stress on the connector and includes a latch protection to prevent cable tangling and latch breakage. The connectors are transparent red, enabling easy visual identification of Category 6. This marking is particularly useful in complex networks to quickly identify the correct cable type.

Technology Explained Simply
The designation U-UTP means that the cable is unshielded and the individual conductor pairs are arranged as twisted pairs. This twisting reduces electromagnetic interference and crosstalk between conductors. The cable structure with AWG 26/7 (26 AWG, 7 wires per conductor) provides sufficient conductivity for the required data rates. The PVC insulation ensures electrical insulation and mechanical stability. The maximum bandwidth of 250 MHz enables data transmission rates up to 10 Gbit/s over short distances, although the actual speed depends on the overall cabling environment.

Compatibility and Accessories
The cable is compatible with all devices that support RJ45 connectors (8P8C). It can be used with network switches, routers, PCs, network printers, and other IT end devices. For use in a CAT 6 network, all other components (e.g. patch panels, sockets) must also meet the same category to fully utilise the performance features. The cables are intended for indoor use and comply with Category 6 according to ISO/IEC 11801 and DIN EN 50173.

Installation and Mounting
Installation is performed by simply inserting the RJ45 connectors into the corresponding sockets. The strain relief boot and latch protection facilitate installation and increase the cable's lifespan, especially in areas with frequent handling or mechanical stress. The cables are suitable for use in rack systems, cable ducts, and at workstations. The length of 1 metre is sufficient for typical applications in offices and server rooms.

Operational Advantages
The cables offer high mechanical stability due to the strain relief boot and tension relief, which increases their lifespan. The red connector colour allows for quick identification of the cable category, which is helpful during maintenance and troubleshooting. The U-UTP structure provides sufficient interference protection for typical indoor environments. Compliance with CAT 6 standards ensures a compatible and high-performance network connection.