| General |
| Cable standard | Cat 5e |
| Shielding | U/UTP |
| Connection | RJ45 |
| Cable length | 5 m |
| Material outer sheath | PVC |
| Colour | Black |
| Structure | 4x 2 AWG 26/7, Twisted Pair |
| Connector | 2x RJ45 (8P8C) |
| Bend protection | Moulded strain relief with strain relief and latch protection |
| Length designation | on the hoods |
| ear category (ElektroG) | Category 6 |
The DIGITUS patch cable with type designation DK-1512-050/BL is a
network cable of category
Cat 5e with a length of 5 metres. It is used to connect network devices such as switches, routers, computers or other IT and telecommunications end devices in a local area network (LAN). The cable is designed as an
unshielded (U/UTP) installation cable and features a
PVC jacket, suitable for indoor use. The cable colour is
black, enabling discreet integration into standard IT infrastructures.
Applications
This cable is designed for use in small and medium-sized networks, particularly in offices, home applications, or for connecting end devices with network interfaces. It complies with
ear category 6 according to ElektroG, meaning it is classified as a small information and telecommunications device and can be used in private households. The Cat 5e category enables data transfer rates up to 1000 Mbit/s (Gigabit Ethernet) at a bandwidth of up to 350 MHz, which is sufficient for most standard applications.
Functions and features in detail
At both ends of the cable,
RJ45 connectors (8P8C) are mounted, which are standard for connecting to network ports. The connectors are fitted with a
moulded strain relief boot, which reduces mechanical stress caused by bending or pulling. The boot integrates a
tension relief, preventing pulling forces from being directly transferred to the contact pins. Additionally, the boot features a
latch protection, preventing the cable from snagging and the latch from breaking off the connector. The
length marking is directly printed on the boots, facilitating identification of cable length during use.
Technology explained simply
The cable consists of four
twisted pairs, each made of two individual wires with a cross-section of AWG 26/7 (equivalent to a diameter of approximately 0.4 mm). This twisting minimises electromagnetic interference (crosstalk) between individual conductors. The designation
U/UTP stands for unshielded, unshielded twisted pair, meaning neither the entire cable nor the individual pairs are shielded with metallic shielding. The
PVC jacket provides mechanical protection and is suitable for indoor use, but not intended for outdoor environments or damp conditions.
Compatibility and accessories
The cable is compatible with all devices that support an RJ45 port, including network switches, routers, PCs, laptops, network printers and other IT end devices. It is designed for use in standard LAN topologies and can be used in combination with other Cat 5e or higher-category cables, with the overall performance determined by the lowest cable category in the path. The use of patch cables of this type is common in server room cabling, workstations, or when connecting network devices to switches.
Installation and mounting
Installation is performed by simply inserting the RJ45 connectors into the corresponding sockets on the devices. The strain relief boots and tension relief facilitate installation, especially in tight racks or when cabling in cable ducts. The use of cable ties or cable ducts for routing is recommended to ensure orderly cabling.
Operational advantages
The integrated strain relief and tension relief increase the cable's lifespan and protect the contact pins from mechanical damage. The latch protection prevents accidental disconnection of the connectors, which is particularly beneficial in dynamic or frequently used environments. The length marking on the boots simplifies identification and maintenance of cables in the network. The cable is designed for indoor use and provides reliable data transmission for standard IT applications.
Scope of delivery
The product is delivered as a DIGITUS Professional CAT 5e U-UTP patch cable, 5 m. It consists of a single cable with both RJ45 connectors, without additional components or packaging accessories.