Further information for DIGITUS DK-1512-020 Patch Cable Cat5e 2.0m gray
General
Cable standard
Cat 5e
Shielding
U-UTP
Connection
RJ45
Cable length
2 m
Cable construction
Round
Material outer sheath
PVC
Conductor cross-section
AWG 26/7
Colour
Grey
Plug colour
Transparent blue
Connector type
RJ45 (8P8C)
Test frequency
100 MHz
Manufacturing standard
ISO/IEC 11801, DIN EN 50173
Tension relief
Bend protection
Locking lever
The DIGITUS DK-1512-020 is a CAT 5e U-UTP patch cable with a length of 2 metres, finished in grey colour. It serves as a connection element in local area networks (LAN) and enables data transmission between network devices such as switches, routers, computers or network printers. The cable is designed for use in standard IT infrastructures, where reliability up to a frequency of 100 MHz is required.
Applications
The cable is suitable for use in office environments, server rooms or for cabling home networks. It complies with the requirements of ISO/IEC 11801 and DIN EN 50173 CAT 5e standards, which apply to the installation of data cabling in buildings. Category 5e enables data transmission rates up to 1 Gbit/s, although the actual speed depends on the network equipment. Use in combination with other CAT 5e or higher components ensures a stable and interference-free connection.
Functions and features in detail
The patch cable features two RJ45 connectors (8P8C) at both ends, which are standard for connecting to network ports. The connectors are equipped with a moulded strain relief boot, which reduces mechanical stress such as bending or pulling forces. This boot also provides tensile strain relief, preventing the cable connection from being damaged by pulling on the connector. An integrated latch protection prevents the cable from snagging and the latch from breaking off the connector, enhancing durability and functionality. The connectors are transparent blue, enabling visual identification of Category 5e.
Technology explained simply
The cable is constructed as U-UTP (unshielded, unshielded twisted pair), meaning that while the individual wire pairs are twisted to minimise electromagnetic interference, there is no additional shielding. The conductors are made of AWG 26/7 copper wire, corresponding to a cross-sectional area of approximately 0.34 mm². The jacket is made of PVC, a robust and flexible plastic suitable for indoor use. The cable's performance has been tested up to 100 MHz, including parameters such as near-end crosstalk (NEXT), ensuring signal quality and data transmission capability under real-world conditions.
Compatibility and accessories
The cable is compatible with all devices that support an RJ45 port, including switches, routers, network interface cards (NICs) and other LAN devices. It can be used in existing CAT 5e or higher network infrastructures. Compatible accessories available in the range include Industrial mini GBIC (SFP) modules with data rates of 1.25 Gbps and 10 Gbps, as well as LWL adapters LC Duplex for single-mode and multi-mode connections. These modules can be integrated into switches or routers to extend the network connection via fibre optic.
Installation and mounting
Installation is carried out by simply plugging the RJ45 connectors into the corresponding sockets of the network devices. The strain relief boots facilitate installation, especially in confined spaces or when routing through cable ducts, as they protect the cable from mechanical stress. The length marking on the boots supports orientation during cabling. No additional tools or mounting aids are required.
Operational advantages
The cable provides stable and reliable data transmission with a low error rate. The integrated protection features on the connectors increase service life and prevent frequent faults caused by mechanical damage. Compliance with international standards ensures interoperability with other network components. The grey colour and blue connector colouring support visual differentiation in complex cabling systems.