DIGITUS DA-70325, EAN: 4016032306481

DIGITUS DA-70325 USB3.0 to SATA II IDE Adapter Cable

Networks > Network Adaptors > USB Adapters

DIGITUS DA-70325 USB3.0 to SATA II IDE Adapter Cable

Lieske Part No. 1570390
Mfg Part No DA-70325
EAN-Code 4016032306481
Manufacturer DIGITUS
Here only 42,23 EUR
50,25 EUR incl. VAT

Further information for DIGITUS DA-70325 USB3.0 to SATA II IDE Adapter Cable

General
Operating voltage12 V
Current supplyPower adaptor
Amperage2 A
USB standardUSB 3.0 (USB 3.2 Gen 1)
Supported hard drive formats6.35 cm (2.5 inch), 8.89 cm (3.5 inch)
Supported hard drive typesSATA, IDE
Maximum hard drive capacity8 TB
Data transfer rate5 Gbps (Super-Speed), 480 Mbps (High-Speed), 12 Mbps (Full-Speed), 1.5 Mbps (Low-Speed)
SATA transfer rate1.5 Gbps, 3.0 Gbps
CompatibilityWindows 7, XP, Vista, macOS
Connector4-Pin
ColourBlack
Compatibility with Serial ATA2.6
Downward compatibilityUSB 2.0, USB 1.1
The DIGITUS USB 3.0 IDE & SATA adapter cable DA-70325 enables direct connection of internal SATA or IDE hard drives to a computer via USB, without requiring an external enclosure. The cable serves as an interface between internal hard drives in 6.35 cm (2.5 inch) and 8.89 cm (3.5 inch) formats and a USB port, allowing the hard drive to be recognised as an external drive. This is particularly useful for maintenance work, data backups, or system recovery, as access to the hard drive is quick and requires no additional hardware.

Applications

The adapter is designed for use in IT service, maintenance, and temporary data access. It is suitable, for example, for diagnosing faulty computers by removing the internal hard drive and connecting it via USB to another system. It is also appropriate for data migration or creating backup copies, as it enables fast and easy connection. Support for hard drives up to a capacity of 8 TB makes it suitable for a wide range of applications in both professional and private environments.

Functions and equipment in detail

The cable supports hard drives in 2.5-inch and 3.5-inch formats, both in SATA and IDE standards. It enables the use of SSDs and HDDs, regardless of whether they are designed for desktop or notebook systems. Data transfer occurs via USB 3.0 (USB 3.2 Gen 1), enabling a maximum transfer rate of 5 Gbps (Super-Speed). Additionally, the adapter is backward compatible with USB 2.0 (High-Speed, 480 Mbps) and USB 1.1 (Full-Speed, 12 Mbps as well as Low-Speed, 1.5 Mbps). SATA transfer rates of 1.5 Gbps and 3.0 Gbps are also supported, ensuring compatibility with modern hard drives. Compatibility with Serial ATA 2.6 ensures use with corresponding storage devices.

Technology explained simply

The adapter acts as a bridge between the internal storage bus (SATA or IDE) and the USB standard. It handles power supply and data transfer via an integrated power supply unit connected by a power cable. The power supply unit delivers 12 V at 2 A, which is sufficient to power even larger 3.5-inch hard drives. The connection is made via a 4-pin connector attached to the hard drive. The USB interface is equipped with the USB 3.0 standard (USB 3.2 Gen 1), enabling high data transfer rates and simultaneous power supply through the cable. The cable is black in colour.

Compatibility and accessories

The adapter is compatible with operating systems such as Windows 7, XP, Vista, and macOS, as specified in the product information. It can be used with hard drives available in 2.5-inch or 3.5-inch formats, regardless of whether they use SATA or IDE technology. As an accessory, a 20 mm wide, 10 m roll of black Velcro strap is offered, suitable for securing and organising cables.

Installation and mounting

Installation is performed by directly connecting the hard drive to the 4-pin connector of the adapter. Subsequently, the power supply unit is connected to a power source via the power cable, and the USB connector is plugged into a free USB port on the computer. The hard drive is automatically recognised and can be used via the operating system. No additional software or driver installation is required, as compatibility with the mentioned operating systems is supported by default.

Advantages in operation

Using the DIGITUS DA-70325 enables quick and flexible use of internal hard drives without additional enclosures. The integrated power supply via the power unit ensures reliable power, especially for 3.5-inch hard drives, which require more power. Support for USB 3.0 ensures high transfer rates, which is beneficial when handling large data volumes. The combination of SATA and IDE support increases flexibility, as both older and newer hard drives can be connected. The black finish blends well into existing IT infrastructures.

Scope of delivery

The product is delivered with the USB 3.0 IDE & SATA cable, an adapter for 8.89 cm (3.5 inch) to 6.35 cm (2.5 inch), a 4-pin connector, a power cable, and a power supply unit (12 V / 2 A).
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1570390
qrcode für DIGITUS DA-70325 USB3.0 to SATA II IDE Adapter Cable