DELOCK 62588, EAN: 4043619625888

DELOCK 62588 USB Isolator A to A Plug/Receptacle

Medical Technology > Electrical Insulation

DELOCK 62588 USB Isolator A to A Plug/Receptacle

Lieske Part No. 827417
Mfg Part No 62588
EAN-Code 4043619625888
Manufacturer DELOCK
Here only 78,99 EUR
94,00 EUR incl. VAT

Further information for DELOCK 62588 USB Isolator A to A Plug/Receptacle

General
Connections1 x USB 2.0 Type A plug (host), 1 x USB 2.0 Type A socket (device), 1 x DC power socket
Data transfer rateup to 12 Mb/s
Optical data isolation5 kV
Optical isolation current3 kV
Current supplyBus-powered or self-powered, bus-powered up to 320 mA
LED indicatorPower supply
Operation temperature-20 °C to 50 °C
Housing materialPlastic
Cable lengthca. 15 cm
Operating system supportOperating system independent, no driver installation required
Power connection5 V, ground outer, positive inner
Power plug dimensionsInside approx. 1.35 mm diameter, outside approx. 3.5 mm diameter, length approx. 9.5 mm
The DELOCK USB isolator with manufacturer number 62588 serves as a galvanic separator between a host PC and a connected USB device. By providing electrical isolation, it prevents noise in audio applications and inaccurate measurement results in laboratory environments. The device is compact and supports the USB 2.0 specification with Low- and Full-Speed, making it suitable for a wide range of applications requiring clean data transmission without electrical coupling.

Applications
This isolator is particularly used in areas where galvanic isolation is necessary to minimize electrical interference. This includes audio devices connected to a computer via USB, as well as measurement instruments in laboratory environments requiring high measurement accuracy. The isolation prevents voltage fluctuations or grounding differences between the host PC and the connected device from causing interference.

Functions and Features in Detail
The device features a USB 2.0 Type A connector for connection to the host PC and a USB 2.0 Type A female port for the connected device. Additionally, it includes a DC power jack to enable external power supply. The optical data isolation is rated at 5 kV, while the power supply isolation is 3 kV. An LED indicator shows the power supply status. Power can be supplied either via the USB bus (bus-powered) or through an external power source (self-powered), with up to 320 mA available in bus-powered mode.

Technology Explained Simply
Galvanic isolation is achieved through optical isolators, which break the electrical connection between the host PC and the USB device without affecting data transmission. Data is transmitted via light signals, eliminating any direct electrical connection. The isolation ratings of 5 kV for data and 3 kV for power supply ensure high safety and stability, even during voltage surges. The operating temperature range is from -20 °C to 50 °C, allowing use in various environments. The enclosure is made of plastic and is compact, measuring approximately 66 x 39 x 20 mm. The cable length is approximately 15 cm.

Compatibility and Accessories
The isolator is operating system independent and requires no driver installation, making it compatible with all common operating systems. The power jack is designed for 5 V, with the ground on the outer side and the positive pole on the inner side. The power jack dimensions are approximately 1.35 mm inner diameter, 3.5 mm outer diameter, and 9.5 mm in length. This specification allows compatibility with standard 5 V power supplies.

Installation and Mounting
Installation is done by simply connecting the USB plug to the host PC and the USB plug to the device. Power can be supplied via the USB bus, if the host’s power supply is sufficient, or through an external power source connected to the DC jack. The LED indicator confirms power supply. No additional tools or configurations are required.

Operational Advantages
Galvanic isolation eliminates electrical coupling between the host PC and the device, reducing interference in audio applications and measurement errors in laboratory environments. Operating system independence and easy installation without driver requirements simplify deployment in various environments. The high isolation strength of 5 kV for data and 3 kV for power supply ensures safe and stable operation even under demanding conditions. The compact design and short cable length of approximately 15 cm allow flexible placement of the device.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/827417
qrcode für DELOCK 62588 USB Isolator A to A Plug/Receptacle