| General |
| External connections | 2 x USB 3.0 Type A socket |
| Internal connections | 19-pin USB 3.0 pin header socket |
| Cable length | ca. 60 cm |
| Data transfer rates | Super-Speed 5 Gb/s, High-Speed 480 Mb/s, Full-Speed 12 Mb/s, Low-Speed 1.5 Mb/s |
| Installation slot | 3.5 or 5.25 inch |
| Scope of delivery | 5.25-inch frame, 3.5-inch front panel with connection cable, screws, instruction manual |
The DELOCK USB 3.0 Front Panel is an installation device for expanding the external USB connections on a PC case. It is designed for installation in a free 3.5-inch or 5.25-inch bay and enables the use of two USB 3.0 Type A sockets on the front of the case. The connections are internally linked via an included cable to a free 19-pin USB 3.0 pin header connector on the motherboard. The device is therefore suitable for increasing the number of accessible USB ports in the system, especially when the rear sockets are already occupied.
Applications
This front panel is used in computer cases that have free 3.5- or 5.25-inch bays. It serves to expand external interfaces, particularly when additional USB ports are needed for external devices such as flash drives, external hard drives, or keyboards. Its use is typical in desktop PCs, where the number of rear connections is limited and front-side expansion is advantageous.
Functions and Features in Detail
The panel features two external USB 3.0 Type A sockets designed for connecting USB devices. Internal connections are made via a 19-pin USB 3.0 pin header socket connected by a cable. The cable has a length of approximately 60 cm, including connectors, which is sufficient to establish a connection between the front panel and the motherboard. The included slot bracket allows the USB connections to be routed through a 5.25-inch bay, enabling the use of the motherboard’s rear USB sockets.
Technology Explained Simply
The USB 3.0 interface supports various data transfer rates, including Super-Speed up to 5 Gb/s, High-Speed at 480 Mb/s, Full-Speed at 12 Mb/s, and Low-Speed at 1.5 Mb/s. These speeds enable fast data transfer, especially for devices requiring high bandwidth, such as external hard drives or USB network cards. The connection is made via the 19-pin header system, which is standard on many motherboards. Power is supplied through the motherboard, so no additional power source is required.
Compatibility and Accessories
The front panel is compatible with computers that have a free 3.5- or 5.25-inch bay and a motherboard with a free 19-pin USB 3.0 pin header port. It is designed for use with standard USB 3.0 devices. The included slot bracket allows the use of the motherboard’s rear USB sockets, increasing installation flexibility. The connectors are standardized, so no special adapters or additional components are required.
Installation and Mounting
Installation involves inserting the front panel into the desired bay (3.5 or 5.25 inch) and securing it with the included screws. The connection cable is attached to the 19-pin USB 3.0 pin header connector on the motherboard. Using the slot bracket enables the use of the rear USB sockets, preventing internal connections from being blocked. Installation requires no special tools other than a screwdriver.
Operational Advantages
Installing the front panel increases the number of accessible USB ports on the front of the case, enhancing user convenience. The use of USB 3.0 enables fast data transfer, and the connection via the motherboard header system is standardized and reliable. The included mounting accessories (slot bracket, screws) simplify installation and offer flexibility in placement.
The product is delivered with a 5.25-inch frame, a 3.5-inch front panel with connection cable, screws, and an instruction manual. The manual contains information on installation and use of the device. The components are designed for installation in standard PC cases and require no additional adapters or tools. Batteries are not included.