Further information for DELL 470-AAVG cable SFP+ to SFP+ 10GbE Twinax 5m
Features
Cable length
5 m
Connector 1
SFP+
Connector 2
SFP+
Product colour
Black
Data transfer rate
10 Gbit/s
InfiniBand protocol
Logistics data
Harmonized System (HS) code
85447000
The DELL 470-AAVG is a Direct Attached Cable (DAC), specifically designed for use in high-bandwidth network infrastructures. It is a copper Twinax cable with a length of 5 metres, equipped with SFP+ connectors at both ends. The cable is used to connect servers, storage devices, or other network equipment within data centres and supports a data transfer rate of 10 Gbit/s. The cable colour is black, allowing it to blend discreetly into typical server environments.
Applications
This cable is intended for use in qualified DELL platforms, such as server or storage solutions requiring direct, cable-based connections over short distances. Due to its design as a Direct Attach Cable, it is primarily used in environments where high data rates with low latency are required, without the need for additional optical components. Its use is limited to distances up to 5 metres, which is typical for connections within a rack or between adjacent servers.
Functions and Features in Detail
The cable features an SFP+ connector at each end, designed to be inserted into corresponding SFP+ ports on network devices. These connectors are hot-pluggable, meaning the cable can be connected or disconnected without shutting down the devices. The data transfer rate of 10 Gbit/s enables fast and reliable transmission of large data volumes, for example in high-performance computing or storage arrays. The cable is suitable for use with the InfiniBand protocol, making it relevant for applications in high-performance computing (HPC) or storage networks.
Technology Explained Simply
A Direct Attached Cable (DAC) is a cable made of copper that connects two devices directly, without requiring additional optical modules or transceivers. The Twinax design means that two coaxial conductors are integrated within the cable, enabling bidirectional data transmission. The copper construction ensures low latency and easy installation, as no additional power supply or optical components are required. The length of 5 metres is ideal for use within a server rack or between adjacent devices, as longer distances could impair signal quality.
Compatibility and Accessories
The cable is specifically developed for use in qualified DELL platforms. It is compatible with devices featuring SFP+ ports and supporting 10-Gigabit Ethernet connections. Use in other systems is not excluded, but not guaranteed, as compatibility is tailored to the specific requirements of DELL platforms.
Installation and Mounting
Installation is performed by simply inserting the SFP+ connectors into the corresponding ports on the devices. Since the connectors are hot-pluggable, the cable can be connected or disconnected even during operation. It is important to ensure that the devices provide the required power supply and correct signal processing for 10 Gbit/s. The connection should be made in a clean, dust-free environment to ensure optimal signal transmission.
Operational Advantages
The cable offers a cost-effective alternative to optical cables for short distances, as it does not require additional transceivers. The low latency and high data rate ensure reliable performance in high-performance applications. The easy handling and the ability to replace the cable during operation increase flexibility for network maintenance and configuration. Additionally, using copper cables reduces energy consumption compared to optical solutions, as no additional power is required for transceivers.