| General |
| SPD according to EN 61643-11 / IEC 61643-11 | type 1 / class I |
| Nominal voltage (a.c.) (UN) | 400 / 690 V (50 / 60 Hz) |
| Max. continuous operating voltage (AC) (UC) | 440 V (50 / 60 Hz) |
| Lightning impulse current (10/350 µs) (Iimp) | 35 kA |
| Specific energy (W/R) | 306.25 kJ/Ohm |
| Voltage protection level (UP) | ≤ 2.5 kV |
| Follow current extinguishing capability (a.c.) (Ifi) | 50 kArms |
| Follow current limitation / Selectivity | no tripping of a 35 A gG fuse up to 50 kArms (prosp.) |
| Response time (tA) | ≤ 100 ns |
| Max. mains-side overcurrent protection | not required |
| Temporary overvoltage (UT) – characteristic | 760 V / 120 min. – withstand |
| Operating temperature range (TU) | -40 °C ... +80 °C |
| Operating state / fault indication | green / red |
| Number of ports | 1 |
| Cross-sectional area (L, N/PE(N)) (min.) | 10 mm2 solid / flexible |
| Cross-sectional area (L, N/PE(N)) (max.) | 50 mm2 stranded / 35 mm2 flexible |
| For mounting on | 35 mm DIN rails acc. to EN 60715 or mounting plate (using the two mounting brackets provided) |
| Enclosure material | thermoplastic, red, UL 94 V-0 |
| Place of installation | indoor installation |
| Degree of protection | IP 20 |
| Capacity | 3 Standard DIN module, DIN 43880 |
| Type of remote signalling contact | changeover contact |
| Switching capacity (a.c.) | 250 V / 0.5 A |
| Switching capacity (d.c.) | 250 V / 0.1 A; 125 V / 0.2 A; 75 V / 0.5 A |
| Cross-sectional area for remote signalling terminals | max. 1.5 mm2 solid / flexible |
| Supplementary data |
| Nominal discharge current (8/20 µs) (In) | 35 kA |
Single-pole, coordinated DEHNbloc Maxi CI lightning current arrester, type 1 according to EN 61643-11, based on spark gaps with integrated arrester backup fuse. High follow current extinguishing capability and follow current limitation thanks to RADAX Flow technology. For protecting low-voltage consumer systems against overvoltages, even in the event of direct lightning strikes. For use in the lightning protection zone concept at the interfaces 0A - 1.