DEHN 952318, EAN: 4013364124011

DEHN 952318 surge arrester 3-pole TN-C

Energy > Surge Protection

DEHN 952318 surge arrester 3-pole TN-C

Lieske Part No. 681522
Mfg Part No 952318
EAN-Code 4013364124011
Manufacturer DEHN
Here only 370,97 EUR
441,45 EUR incl. VAT

Further information for DEHN 952318 surge arrester 3-pole TN-C

Standards
CertificationUL
UL StandardUL 1449 5th edition
UL File NumberE319777
Technical data
Energy coordination with terminal equipment (≤ 10 m)type 2 + type 3
Nominal voltage (a.c.) (UN)120 / 240 V (50 / 60 Hz)
Max. continuous operating voltage (AC) (UC)150 V (50 / 60 Hz)
Nominal discharge current (8/20 µs) (In)15 kA
Max. discharge current (8/20 µs) (Imax)40 kA
Voltage protection level (UP)≤ 0.8 kV
Voltage protection level at 5 kA (UP)≤ 0.55 kV
Response time (tA)≤ 25 ns
Max. mains-side overcurrent protection125 A gG
Short-circuit withstand capability for max. mains-side overcurrent protection (ISCCR)50 kArms
Temporary overvoltage (UT) – characteristic175 V / 5 sec. – Festigkeit, 230 V / 120 min. – sicherer Ausfall
Operating temperature range (TU)-40 °C ... +80 °C
Operating state / fault indicationgreen / red
Number of ports1
Cross-sectional area (min.)1.5 mm2 solid / flexible
Cross-sectional area (max.)35 mm2 stranded / 25 mm2 flexible
For mounting on35 mm DIN rails acc. to EN 60715
Enclosure materialthermoplastic, red, UL 94 V-0
Place of installationindoor installation
Degree of protectionIP 20 (integrated)
Capacity3 Standard DIN module, DIN 43880
ApprovalsDEKRA, UL
Type of remote signalling contactchangeover contact
Switching capacity (a.c.)250 V / 0.5 A
Switching capacity (d.c.)250 V / 0.1 A; 125 V / 0.2 A; 75 V / 0.5 A
Cross-sectional area for remote signalling terminalsmax. 1.5 mm2 solid / flexible
Test values according to UL 1449
Rated Voltage (AC, 50/60 Hz)120 V
MCOV (AC, 50/60 Hz) [L-N]/[L-G]/[N-G]150 V
Voltage protection rating (VPR)≤ 700 V
Nominal discharge current (8/20µs) ( In)15 kA
Maximum ambient temperature85 °C
UL 1449 edition5th edition
Type (SPD classification)Type 4 component assembly
Multipole surge arrester DEHNguard M, type 2 according to EN 61643-11, consisting of a base part and plugged-in protection modules. High device safety due to arrester monitoring with Thermo-Dynamic-Control. For protecting low-voltage consumer systems against surges. For use in the lightning protection zone concept at the interfaces 0B - 1 and higher.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/681522
qrcode für DEHN 952318 surge arrester 3-pole TN-C