DEHN 952220, EAN: 4013364376656

DEHN 952220 surge protection discharge Type 2 275 V ACI

Energy > Surge Protection

DEHN 952220 surge protection discharge Type 2 275 V ACI

Lieske Part No. 1003404
Mfg Part No 952220
EAN-Code 4013364376656
Manufacturer DEHN
Here only 266,95 EUR
317,67 EUR incl. VAT

Further information for DEHN 952220 surge protection discharge Type 2 275 V ACI

General
SPD according to EN 61643-11 / IEC 61643-11type 2 / class II
Energy coordination with terminal equipment (≤ 10 m)type 2 + type 3
Nominal voltage (a.c.) (UN)230 V (50 / 60 Hz)
Max. continuous operating voltage (a.c.) [L-PE] (UC)275 V (50 / 60 Hz)
Max. continuous operating voltage (a.c.) [N-PE] (UC)255 V (50 / 60 Hz)
Nominal discharge current (8/20 µs) (In)20 kA
Voltage protection level [L-PE]/[N-PE] (UP)≤ 1.5 / ≤ 1.5 kV
Response time (tA)≤ 100 ns
Additional external fuse necessarynot required
Short-circuit withstand capability (ISCCR)25 kArms
Temporary overvoltage (UT) – characteristic440 V / 120 min. – withstand
Leakage currentno leakage current
Operating temperature range (TU)-40 °C ... +80 °C
Operating state / fault indicationgreen / red
Number of ports1
Cross-sectional area (min.)1.5 mm2 solid / flexible
Cross-sectional area (max.)35 mm2 stranded / 25 mm2 flexible
For mounting on35 mm DIN rails acc. to EN 60715
Enclosure materialthermoplastic, red, UL 94 V-0
Place of installationindoor installation
Degree of protectionIP 20
Capacity2 Standard DIN module, DIN 43880
ApprovalsKEMA
Type of remote signalling contactchangeover contact
Switching capacity (a.c.)250 V / 0.5 A
Switching capacity (d.c.)250 V / 0.1 A; 125 V / 0.2 A; 75 V / 0.5 A
Cross-sectional area for remote signalling terminalsmax. 1.5 mm2 solid / flexible
Surge arrester with ACI technology DEHNguard M TN ACI 275 FM
2-pole modular, pluggable surge arrester
with integrated ACI switch/spark gap
for single-phase 230 V TN systems, width 2TE
With remote signaling
contact Type 2 arrester according to EN 61643-11
Highest continuous voltage: 275 V ac
Protection level: < 1.5 kV Nominal
leakage surge current: 20 kA
Additional external fuse not necessary
Energetic coordination according to DIN EN 62305-4
Arresters of the Red/Line family
Mechanical defect display for arresters
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1003404
qrcode für DEHN 952220 surge protection discharge Type 2 275 V ACI