DEHN 952205, EAN: 4013364108400

DEHN 952205 Surge Arrester Type 2

Energy > Surge Protection

DEHN 952205 Surge Arrester Type 2

Lieske Part No. 232877
Mfg Part No 952205
EAN-Code 4013364108400
Manufacturer DEHN
Here only 223,72 EUR
266,23 EUR incl. VAT

Further information for DEHN 952205 Surge Arrester Type 2

General
Degree of protectionType 2
NormEN 61643-11
System typesingle-phase, TN system
Monitoring technologyThermo-Dynamik-Control
Use in lightning protection zone conceptinterfaces 0B – 1 and higher
Product typemultipole surge arrester
The DEHNguard M DG M TN 275 FM is a multipole surge arrester of Type 2 category, designed for the protection of low-voltage consumer installations against transient overvoltages. The manufacturer is DEHN, and the device complies with the standard EN 61643-11. It consists of a base unit and plug-in protection modules, enabling a modular and adaptable protection configuration. The arrester is intended for use in the lightning protection zone concept at interfaces 0B – 1 and higher, making it suitable for use in buildings with increased lightning protection requirements.

Applications
This surge arrester is designed for use in single-phase TN systems, which are common in electrical engineering. It protects electrical consumer installations, such as lighting, heating, household appliances, or IT infrastructure, against overvoltages caused by lightning strikes on supply lines or inductive voltage surges in the network. The application typically occurs in the field of distribution technology, where energy supply is distributed within buildings.

Functions and Equipment in Detail
A central feature of the DEHNguard M is the integrated arrester monitoring with Thermo-Dynamic-Control. This technology enables continuous monitoring of the arrester, allowing early detection of failure or degradation of the protection element. The Thermo-Dynamic-Control responds to thermal changes in the arrester, indicating potential functional impairment, and signals this via an optical or electrical status indicator. This increases device safety, as a defective arrester is no longer left undetected.

Technology Explained Simply
The arrester operates on the principle of overvoltage limitation: when an overvoltage occurs, it functions as a discharge resistor and safely diverts the excess energy to earth. The protection modules are inserted into the base unit, allowing flexible configuration according to the number of conductors to be protected (e.g., L, N, PE). The construction ensures high reliability and long service life under normal operating conditions.

Compatibility and Accessories
The DEHNguard M DG M TN 275 FM is specifically designed for single-phase TN systems. It is part of the DEHNguard M series and can be combined with other modules from the series to achieve different protection configurations. It is used in conjunction with a suitable distribution box or distribution unit that provides the necessary connection options. The exact installation must follow the requirements of standard EN 61643-11 and the manufacturer’s technical documentation.

Installation and Mounting
Installation typically takes place in a distribution box or distribution unit, where the energy supply is divided into individual consumer circuits. The arrester is connected to the respective conductors (L, N, PE), with the exact connection sequence and mounting method complying with the standard and the installation instructions. Mounting requires knowledge of the electrical distribution and adherence to safety regulations.

Operational Advantages
The DEHNguard M provides high protection performance for sensitive consumer installations. The integrated monitoring with Thermo-Dynamic-Control enhances operational safety, as a defective arrester is detected early. This prevents unexpected failures and protects connected devices from damage. The modular design allows flexible adaptation to different system configurations, making the arrester suitable for various application scenarios.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/232877
qrcode für DEHN 952205 Surge Arrester Type 2