DEHN 952122, EAN: 4013364387867

DEHN 952122 surge protection Type 2 2-pole 385 V ACI

DEHN 952122 surge protection Type 2 2-pole 385 V ACI

Lieske Part No. 1865586
Mfg Part No 952122
EAN-Code 4013364387867
Manufacturer DEHN
Here only 159,07 EUR
189,29 EUR incl. VAT

Further information for DEHN 952122 surge protection Type 2 2-pole 385 V ACI

General
SPD according to EN 61643-11 / IEC 61643-11type 2 / class II
Energy coordination with terminal equipment (≤ 10 m)type 2 + type 3
Nominal voltage (a.c.) (UN)230 V (50 / 60 Hz)
Max. continuous operating voltage (a.c.) [L-N] (UC)385 V (50 / 60 Hz)
Max. continuous operating voltage (a.c.) [N-PE] (UC)255 V (50 / 60 Hz)
Nominal discharge current (8/20 µs) [L-N] (In)20 kA
Nominal discharge current (8/20 µs) [N-PE] (In)80 kA
Max. discharge current (8/20 µs) [L-N] (Imax)40 kA
Max. discharge current (8/20 µs) [N-PE] (Imax)120 kA
Voltage protection level [L-N]/[N-PE] (UP)≤ 1.5 / ≤ 1.5 kV
Voltage protection level [L-N]/[N-PE] at 5 kA (UP)≤ 1,5 / ≤ 1,5 kV
Follow current extinguishing capability [N-PE] (Ifi)100 Aeff
Response time [L-N] (tA)≤ 100 ns
Response time [N-PE] (tA)≤ 100 ns
Additional external fuse necessarynot required
Short-circuit withstand capability (ISCCR)25 kArms
Temporary overvoltage (TOV) [L-N] (UT) – Characteristic440 V / 120 min. – withstand
Temporary overvoltage (TOV) [N-PE] (UT) - Characteristic1200 V / 200 ms – withstand
Leakage currentno leakage current
Operating temperature range (TU)-40 °C ... +80 °C
Operating state / fault indicationgreen / red
Number of ports1
Cross-sectional area (min.)1.5 mm2 solid / flexible
Cross-sectional area (max.)35 mm2 stranded / 25 mm2 flexible
For mounting on35 mm DIN rails acc. to EN 60715
Enclosure materialthermoplastic, red, UL 94 V-0
Place of installationindoor installation
Degree of protectionIP 20
Capacity2 Standard DIN module, DIN 43880
ApprovalsKEMA
Type of remote signalling contactchangeover contact
Switching capacity (a.c.)250 V / 0.5 A
Switching capacity (d.c.)250 V / 0.1 A; 125 V / 0.2 A; 75 V / 0.5 A
Cross-sectional area for remote signalling terminalsmax. 1.5 mm2 solid / flexible
Mehrpoliger Überspannungsableiter DEHNguard M ACI, Typ 2 nach EN 61643-11 mit integrierte ACI-Schalter-/Funkenstrecken - Kombination, bestehend aus Basisteil und gesteckten Schutzmodulen. Hohe Gerätesicherheit durch Ableiterüberwachung mit Thermo-Dynamik-Control. Zum Schutz von Niederspannungs-Verbraucheranlagen vor Überspannungen. Zum Einsatz im Blitz-Schutzzonen-Konzept an den Schnittstellen 0B - 1 und höher.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1865586
qrcode für DEHN 952122 surge protection Type 2 2-pole 385 V ACI