DEHN 952080, EAN: 4013364127296

DEHN 952080 surge arrester Type 2 1p Uc 75 V AC

DEHN 952080 surge arrester Type 2 1p Uc 75 V AC

Lieske Part No. 1285106
Mfg Part No 952080
EAN-Code 4013364127296
Manufacturer DEHN
Here only 142,97 EUR
170,13 EUR incl. VAT

Further information for DEHN 952080 surge arrester Type 2 1p Uc 75 V AC

General
Energy coordination with terminal equipment (≤ 10 m)type 2 + type 3
Nominal voltage (a.c.) (UN)60 V (50 / 60 Hz)
Max. continuous operating voltage (AC) (UC)75 V (50 / 60 Hz)
Nominal discharge current (8/20 µs) (In)10 kA
Max. discharge current (8/20 µs) (Imax)20 kA
Voltage protection level (UP)≤ 1.1 kV
Response time (tA)≤ 100 ns
Max. mains-side overcurrent protection100 A gG
Short-circuit withstand capability for max. mains-side overcurrent protection (ISCCR)25 kArms
Temporary overvoltage (UT) – characteristic115 V / 120 min. – withstand
Operating temperature range (TU)-40 °C ... +80 °C
Operating state / fault indicationgreen / red
Number of ports1
Cross-sectional area (min.)1.5 mm2 solid / flexible
Cross-sectional area (max.)35 mm2 stranded / 25 mm2 flexible
For mounting on35 mm DIN rails acc. to EN 60715
Enclosure materialthermoplastic, red, UL 94 V-0
Place of installationindoor installation
Degree of protectionIP 20 (integrated)
Capacity1 Standard DIN module, DIN 43880
Single-pole surge arrester DEHNguard S VA, type 2 according to EN 61643-11, consisting of a base part and a varistor spark gap series connection in the protection module. High device safety due to arrester monitoring with thermo-dynamic control. For protecting low-voltage consumer systems against surges. For use in the lightning protection zone concept at the interfaces 0B - 1 and higher.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1285106
qrcode für DEHN 952080 surge arrester Type 2 1p Uc 75 V AC