DEHN 952018, EAN: 4013364119482

DEHN 952018 DG MOD 48 surge arrester Type 2

Energy > Surge Protection

DEHN 952018 DG MOD 48 surge arrester Type 2

Lieske Part No. 286645
Mfg Part No 952018
EAN-Code 4013364119482
Manufacturer DEHN
Here only 93,57 EUR
111,35 EUR incl. VAT

Further information for DEHN 952018 DG MOD 48 surge arrester Type 2

General
Degree of protectionType 2
NormEN 61643-11
TechnologyVaristor (voltage-sensitive resistor)
Nominal discharge current (8/20 µs) (In)7.5 kA
Operating voltage48 V
CompatibilityDEHNguard M and S
Max. discharge current (8/20 µs) (Imax)25 kA
Max. continuous operating a.c. voltage (UC)48 V
The DEHN DG MOD 48 is a Varistor protection module of Type 2 category, specifically developed for modular surge protection devices in the DEHNguard family, particularly for the DEHNguard M and DEHNguard S models. It serves as a replacement module for protecting electrical installations against transient overvoltages caused by lightning strikes or electrical disturbances in the network. The module is part of the Red/Line product family and complies with standard EN 61643-11, which defines requirements for surge protection devices installed in electrical systems.

Applications
This protection module is intended for use in energy supply and industrial electrical engineering applications where reliable protection against overvoltages is required. It is installed in enclosures or distribution boards to protect sensitive electronic devices and systems from damage caused by voltage surges. The maximum continuous voltage is 48 V AC, making it suitable for low-voltage installations. The operating voltage is also 48 V, enabling its use in systems operating at this voltage level.

Functions and Features in Detail
The module is based on Varistor technology, utilizing zinc oxide varistors. These enable high surge current discharge capacity, ensuring transient voltage spikes are safely diverted. The nominal discharge current is 7.5 kA (8/20 µs), while the maximum discharge current is 25 kA. These values ensure effective protection under high-energy conditions. An integrated viewing window with green-red marking serves as a function and fault indicator, allowing the module’s status to be visually checked. In case of a fault, the indicator changes from green to red.

Technology Explained Simply
The zinc oxide varistors react quickly to voltage spikes and divert them without impairing the protection function. The technology is energy-coordinated within the Red/Line family, meaning the modules work together without causing mutual damage. The module features a module locking system that enables tool-free replacement. A module release button facilitates swapping without requiring additional tools. The construction is vibration- and shock-tested according to EN 60068-2, enhancing reliability in industrial environments.

Compatibility and Accessories
The DG MOD 48 is specifically designed for DEHNguard M and DEHNguard S devices. It is part of the modular product family and can be installed in the corresponding protection devices. Compatibility with DEHNgap C S is also specified, enabling use in various system configurations. The modules are designed to fit into designated slots in DEHNguard devices and are securely fixed in place.

Installation and Mounting
Installation is performed by simply inserting the module into the designated slot in DEHNguard devices. The module release button allows for tool-free replacement, simplifying maintenance and repair. No additional mounting or wiring is required, as the module integrates directly into the device. Installation conditions comply with the requirements of standard EN 61643-11.

Operational Advantages
The DEHN DG MOD 48 provides reliable and maintenance-friendly protection. The visual fault indicator enables quick identification of failures, enhancing operational safety. The high surge discharge capacity ensures effective protection against overvoltages. Tool-free replacement reduces maintenance time and minimizes labor effort. Compliance with standard EN 61643-11 ensures adherence to technical requirements for surge protection devices.

Protection Class and Standards
The module is classified as Type 2, meaning it is intended for use in the second level of protection, typically in distribution boards or on the load side of Type 1 protection devices. Standard EN 61643-11 defines the electrical and mechanical requirements that the module meets. Testing according to EN 60068-2 for vibration and shock ensures mechanical robustness.

Compatibility with DEHNguard Systems
The module is specifically developed for DEHNguard M and DEHNguard S devices. It is part of the modular system architecture, enabling flexible and scalable protection. Use in combination with other modules from the Red/Line family is possible, with guaranteed energy coordination.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/286645
qrcode für DEHN 952018 DG MOD 48 surge arrester Type 2