DEHN 943317, EAN: 4013364522220

DEHN 943317 surge protector Type 2

DEHN 943317 surge protector Type 2

Lieske Part No. 889517
Mfg Part No 943317
EAN-Code 4013364522220
Manufacturer DEHN
Here only 453,63 EUR
539,82 EUR incl. VAT

Further information for DEHN 943317 surge protector Type 2

Technical data
Energy coordination with terminal equipment (≤ 10 m)Type 2 + type 3
Nominal voltage (a.c.) (UN)230 / 400 V (50 / 60 Hz)
Max. continuous operating voltage (a.c.) [L-N] (UC)385 V (50 / 60 Hz)
Max. continuous operating voltage (a.c.) [N-PE] (UC)255 V (50 / 60 Hz)
Nominal discharge current (8/20 µs) (In)20 kA
Max. discharge current (8/20 µs) (Imax)40 kA
Combination wave [L-N] (UOC)20 kV
Combination wave [N-PE] (UOC)6 kV
Nominal load current for “V-connection” (IL)63 A
Voltage protection level [L-N]/[N-PE] (UP)≤ 1.75 / ≤ 1.5 kV
Voltage protection level [L-N]/[N-PE] at 5 kA (UP)≤ 1.35 / ≤ 1.5 kV
Protective conductor current (IPE)≤ 10 µA
Response time [L-N] (tA)≤ 25 ns
Response time [N-PE] (tA)≤ 100 ns
Max. mains-side overcurrent protection125 A gG
Max. mains-side overcurrent protection with “V-connection”63 A gG
Short-circuit withstand capability for max. mains-side overcurrent protection (ISCCR)25 kArms
Temporary overvoltage (TOV) [L-N] (UT) – Characteristic335 V / 5 sec. – Festigkeit, 440 V / 120 min. – Festigkeit
Temporary overvoltage (TOV) [N-PE] (UT) - Characteristic1200 V / 200 ms – withstand
Operating temperature range (TU)-40 °C ... +80 °C
Operating state / fault indicationgreen / red
Number of ports1
Cross-sectional area (min.)1.5 mm2 solid / flexible
For mounting on35 mm DIN rails acc. to EN 60715
Enclosure materialThermoplastic, red, UL 94 V-0
Place of installationIndoor
Degree of protectionIP 20 (integrated)
Capacity4 modules, DIN 43880 Standard DIN module, DIN 43880
Type of remote signalling contactchangeover contact
Switching capacity (a.c.)250 V / 0.5 A
Switching capacity (d.c.)250 V / 0.1 A; 125 V / 0.2 A; 75 V / 0.5 A
Cross-sectional area for remote signalling terminalsmax. 1.5 mm2 solid / flexible
Mehrpoliger Überspannungsableiter DEHNguard MD, Typ 2 nach EN 61643-11, bestehend aus Basisteil und gesteckten Schutzmodulen. Hohe Gerätesicherheit durch Ableiterüberwachung mit Thermo-Dynamik-Control. Zum Schutz von Niederspannungs-Verbraucheranlagen vor Überspannungen. Zum Einsatz im Blitz-Schutzzonen-Konzept an den Schnittstellen 0B - 1 und höher.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/889517
qrcode für DEHN 943317 surge protector Type 2