DEHN 942330, EAN: 4013364495319

DEHN 942330 surge arrester Type 2

DEHN 942330 surge arrester Type 2

Lieske Part No. 602495
Mfg Part No 942330
EAN-Code 4013364495319
Manufacturer DEHN
Here only 471,49 EUR
561,07 EUR incl. VAT

Further information for DEHN 942330 surge arrester Type 2

General
SPD according to EN 61643-11 / IEC 61643-11type 2 / class II
Energy coordination with terminal equipment (≤ 10 m)type 2 + type 3
Nominal voltage (a.c.) (UN)230 / 400 V (50 / 60 Hz)
Max. continuous operating voltage (AC) (UC)275 V (50 / 60 Hz)
Nominal discharge current (8/20 µs) (In)20 kA
Nominal load current for “V-connection” (IL)40 A
Voltage protection level (UP)≤ 1.5 kV
Voltage protection level at 5 kA (UP)≤ 1,5 kV
Response time (tA)≤ 100 ns
Additional external fuse necessarynot required
Short-circuit withstand capability (ISCCR)25 kArms
Max. mains-side overcurrent protection with “V-connection”40 A gG
Temporary overvoltage (UT) – characteristic335 V / 5 sec. – withstand, 440 V / 120 min. – withstand
Leakage currentno leakage current
Operating temperature range (TU)-40 °C ... +80 °C
Operating state / fault indicationgreen / red
Number of ports1
Cross-sectional area (min.)1.5 mm2 solid, 6 mm2 fine stranded
Cross-sectional area (max.)10 mm2 solid / fine stranded
For mounting on35 mm DIN rails acc. to EN 60715
Enclosure materialthermoplastic, red, UL 94 V-0
Place of installationindoor installation
Degree of protectionIP 20
Capacity3 Standard DIN module, DIN 43880
ApprovalsKEMA, VDE
Type of remote signalling contactchangeover contact
Switching capacity (a.c.)250 V / 0.5 A
Switching capacity (d.c.)250 V / 0.1 A; 125 V / 0.2 A; 75 V / 0.5 A
Cross-sectional area for remote signalling terminalsmax. 1.5 mm2 solid / flexible
Mehrpoliger Überspannungsableiter DEHNguard MP ACI, Typ 2 nach EN 61643-11 mit integrierte ACI-Schalter-/Funkenstrecken - Kombination, bestehend aus Basisteil mit gesteckten Schutzmodulen und Doppel-Push-In-Anschlussklemme für Stich- und Durchgangsverdrahtung geeignet. Hohe Gerätesicherheit durch Ableiterüberwachung mit Thermo-Dynamik-Control. Zum Schutz von Niederspannungs-Verbraucheranlagen vor Überspannungen. Zum Einsatz im Blitz-Schutzzonen-Konzept an den Schnittstellen 0B - 1 und höher.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/602495
qrcode für DEHN 942330 surge arrester Type 2