DEHN 918421, EAN: 4013364094901

DEHN 918421 BVT KKS APD 36 combination arrester

Energy > Surge Protection

DEHN 918421 BVT KKS APD 36 combination arrester

Lieske Part No. 216743
Mfg Part No 918421
EAN-Code 4013364094901
Manufacturer DEHN
Here only 274,45 EUR
326,60 EUR incl. VAT

Further information for DEHN 918421 BVT KKS APD 36 combination arrester

General
Product typecombination surge arrester
Protection functionOvervoltage protection for voltage measurement circuit
ColourYellow
Remote alarm contactpluggable, Normally closed contact (NC)
FunctionThermal monitoring of surge paths
ControlCapacitive
Operating voltagelow
Installation recommendationin steel sheet housing
SPD classM
Max. continuous operating voltage DC (UC)36.8 V
Nominal current (IN)0.05 A
D1 Lightning impulse current (10/350 µs) per line (Iimp)3.5 kA
D1 Total lightning impulse current (10/350 µs) (Iimp)7 kA
C2 Total nominal discharge current (8/20 µs) (In)40 kA
Series impedance per line55 ohms
Type of remote signalling contactbreak contact
The DEHN BVT KKS APD 36 is an energetically coordinated combination surge arrester, specifically designed for the protection of voltage measurement circuits in electrical installations. The device serves as a surge protection device and is particularly used in cathodic protection systems, where precise and reliable voltage monitoring is required. The yellow colouring of the arrester serves as visual identification and differentiation within switchgear. The arrester features a plug-in remote signalling contact, configured as a normally closed (NC) contact, used to indicate overload conditions. This function enables thermal monitoring of the arrester paths, so that in case of overload, the contact opens and triggers an alarm signal.

Applications

The BVT KKS APD 36 is intended for use in industrial and technical installations, particularly in systems connected to cathodic protection systems. Here, it protects the voltage measurement circuit from transient overvoltages caused by lightning strikes, switching operations, or other electrical disturbances. The application is typically in electrical distribution systems where high reliability and long-term stability are required. The recommendation to install it in a steel sheet enclosure provides additional mechanical and electromagnetic shielding, as well as improved heat dissipation.

Functions and Equipment in Detail

A central feature of the arrester is capacitive control, which enables a low impulse trigger voltage. This ensures a fast and reliable response to overvoltage impulses without impairing the protective function due to excessively high trigger thresholds. The integrated plug-in remote signalling contact (normally closed) serves as an indicator for overload conditions. It can be integrated into existing monitoring systems to trigger a warning when the arrester experiences thermal stress. The plug-in design of the contact facilitates maintenance and replacement without complete disassembly of the arrester.

Technology Explained Simply

The arrester operates on the principle of a combination surge arrester, combining the function of an arrester for high energy loads with that of a surge protection device for low energy levels. The energetic coordination ensures that the arrester safely and selectively diverts energy during overvoltage events, without overloading other protective components in the system. The capacitive control optimizes response delay and enables precise reaction to short, high-voltage spikes. The yellow colour serves as visual identification to quickly locate the arrester within the enclosure.

Compatibility and Accessories

The BVT KKS APD 36 is designed for use in cathodic protection systems and is used in conjunction with voltage measurement circuits. Compatibility with existing switchgear and monitoring systems is supported by the plug-in remote signalling contact, which can be integrated into standard switchboards.

Mounting and Installation

Mounting is carried out in a steel sheet enclosure, which is recommended to minimize mechanical stress, electromagnetic interference, and thermal influences. Installation takes place in an enclosure or distribution unit, with electrical connections to be made according to the technical specifications of the installation. The plug-in design of the remote signalling contact simplifies installation and maintenance, as it can be replaced without tools.

Operational Advantages

The arrester offers high reliability through energetic coordination and capacitive control, enabling a low trigger voltage. The integrated overload indication via the plug-in remote signalling contact allows early detection of malfunctions and supports maintenance. The yellow identification facilitates quick recognition in the enclosure, and the recommendation to install in a steel sheet enclosure ensures a robust and long-lasting installation. Its application in cathodic protection systems highlights the product’s specific orientation towards demanding industrial environments.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/216743
qrcode für DEHN 918421 BVT KKS APD 36 combination arrester