| General |
| Integration of | up to 15 DRC MCM AL XT modules (maximum 150 Blitzductor XT/XTU), up to 4 remote signalling contacts |
| Operation | via App |
| Integration | in Modbus RTU / TCP areas |
| Input voltage range DC (UIN) | 11-28 V |
| Max. power | 600 mW |
| Terminating resistor | 120 Ω |
| Connection Modbus RTU | RS485 |
| Connection Modbus TCP | RJ45 |
| Communication type | Master-Slave |
| Operating temperature range (TU) | -40 °C ... +80 °C |
| Degree of protection | IP 10 |
| Capacity | 1 Standard DIN module, DIN 43880 |
| For mounting on | 35 mm DIN rail acc. to EN 60715 |
| Connection supply/digital inputs/RS 485 | screw 2.5 mm2 |
| Connection Ethernet | RJ45 |
| Cross-sectional area, solid / flexible | 0.14-1.5 mm2 |
| Enclosure material | Ultramid B3UGM210 |
| Colour | grey |
| Test standards | CU |
| Inputs | 4 universally applicable remote signalling contacts and up to 150 BLITZDUCTOR XT via DRC MCM AL XT (910 698) |
| Communication | Modbus RTU/TCP |
| Connection of remote signalling contacts | 4 digital inputs (IEC 61131-2) |
| Input wiring | open = 0; 12 V / 24 V = 1 |
| Input voltage | 0-28 V |
| Input current of remote signalling contacts | < 6 mA |
| Connection DRC MCM AL XT | RS485 |
| Dimensions | 18 x 90 x 61 mm |
DEHNrecord Alert sends status messages from surge protective devices (SPDs) to an evaluation system via Modbus TCP / RTU and enables forwarding to devices such as notebooks, tablets, smartphones, PCs or to the system control center. DEHNrecord Alert can be quickly put into operation using an app. The app transmits device information, e.g. article numbers, type designations and replacement modules, to DEHNrecord Alert. By sending this data to the user's evaluation device, maintenance and service work can be planned and carried out efficiently and cost-effectively.