DEHN 909831, EAN: 4013364449732

DEHN 909831 DSH ZP 2 LSG TT 255 combination surge arrester Type1+2

Energy > Surge Protection

DEHN 909831 DSH ZP 2 LSG TT 255 combination surge arrester Type1+2

Lieske Part No. 1918425
Mfg Part No 909831
EAN-Code 4013364449732
Manufacturer DEHN
Here only 855,28 EUR
1.017,78 EUR incl. VAT

Further information for DEHN 909831 DSH ZP 2 LSG TT 255 combination surge arrester Type1+2

General
SPD according to EN 61643-11 / IEC 61643-11type 1 + type 2 + type 3 / class I + class II + class III
Energy coordination with terminal equipment (≤ 10 m)type 1 + type 2 + type 3
Nominal voltage (a.c.) (UN)230 / 400 V (50 / 60 Hz)
Max. continuous operating voltage (AC) (UC)255 V (50 / 60 Hz)
Lightning impulse current (10/350 µs) [L1+L2+L3+N-PE] (Itotal)50 kA
Lightning impulse current (10/350 µs) [L-N] (Iimp)12.5 kA
Specific energy [L-N] (W/R)39.06 kJ/Ohm
Lightning impulse current (10/350 µs) [N-PE] (Iimp)50 kA
Specific energy [N-PE] (W/R)625 kJ/Ohm
Nominal discharge current (8/20 µs) [L-N]/[N-PE] (In)20 / 80 kA
Voltage protection level [L-N] (UP)≤ 1.5 kV
Voltage protection level [N-PE] (UP)≤ 1.5 kV
Open-circuit voltage of the combination wave generator (UOC)20 kV
Max. mains-side overcurrent protection160 A gG
Temporary overvoltage (TOV) [L-N] (UT) – Characteristic440 V / 120 min. – withstand
Temporary overvoltage (TOV) [N-PE] (UT) - Characteristic1200 V / 200 ms – withstand
Operating temperature range (TU)-40 °C ... +80 °C
Operating state / fault indicationgreen / red
Number of ports1
Cross-sectional area (PEN, )16-25 mm2 flexible / 16-35 mm2 stranded
For mounting on40 mm busbar systems
Enclosure materialthermoplastic, red, UL 94 V-0
Place of installationindoor installation
Degree of protectionIP 30 (in combination with cover)
ApprovalsVDE
Power supply (for compartment for additional applications/termination point meter mounting board according to VDE-AR-N 4100) (UN)230 V
Extended technical data
Voltage protection level [L-PE] (UP)≤ 1.6 kV
Combined arrester type 1 + type 2 + type 3 according to EN 61643-11 for TT and TN-S systems (3+1 circuit). Subsequent integration of a single-pole B6 circuit breaker possible to implement a power supply for the intelligent measuring system. Two sockets for the 230 V power supply (N and L) each for RfZ / APZ according to VDE-AR-N 4100 are integrated in the device, for use on the 40 mm busbar system in the main power supply system according to DIN VDE 0100-443 in buildings with an external lightning protection system (lightning protection class III/IV).
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1918425
qrcode für DEHN 909831 DSH ZP 2 LSG TT 255 combination surge arrester Type1+2