DEHN 909705, EAN: 4013364105706

DEHN 909705 DGA GFF TV combination surge arrester gate 75 Ohm

Energy > Surge Protection

DEHN 909705 DGA GFF TV combination surge arrester gate 75 Ohm

Lieske Part No. 212755
Mfg Part No 909705
EAN-Code 4013364105706
Manufacturer DEHN
Here only 155,04 EUR
184,50 EUR incl. VAT

Further information for DEHN 909705 DGA GFF TV combination surge arrester gate 75 Ohm

General
Connection typeF-connector
Characteristic impedance75 Ohm
Shielding classA
NormEN 50 083-2
Measurement outputIntegrated
Suitability for remote power supplyYes
Detail
SPD classH {
Max. continuous operating voltage DC (UC)24 V
Nominal current (IN)2 A
D1 Lightning impulse current (10/350 µs) (Iimp)2.5 kA
C2 Nominal discharge current (8/20 µs) (In)10 kA
Frequency ranged.c. / 5-2400 MHz
Connection (input / output)F socket / F socket
The DEHN DGA GFF TV is a remote power supply compatible combination surge arrester with F-connector, specifically developed for use in 75 Ohm SAT and cable TV systems. It serves as a surge protection device that safely transmits high-frequency signals while simultaneously protecting against transient overvoltages caused by lightning strikes or network disturbances. The device is designed for space-saving installation in typical TV and SAT systems and is particularly suitable for applications requiring high shielding effectiveness.

Applications
This arrester is used in satellite and cable TV systems where signals are transmitted via coaxial cables with an impedance of 75 Ohm. It is especially suitable for installations in residential buildings, multi-family houses, or commercial facilities where television and broadband communication systems are operated. The remote power supply compatibility allows the supply of end devices such as satellite or cable distribution boxes via the coaxial cable, eliminating the need for additional power sources.

Functions and Features in Detail
The DGA GFF TV features an integrated test output that enables system inspection. This output is used to check the functionality of the arrester and the quality of signal transmission, for example by measuring attenuation or reflection coefficient. The integrated shielding meets the enhanced requirements of Class A according to EN 50 083-2, ensuring particularly high shielding effectiveness against electromagnetic interference. This is crucial to maintain signal quality in sensitive installations.

Technology Explained Simply
The arrester combines the functions of a surge protection device with signal transmission. Under normal operating conditions, it passes high-frequency signals (e.g. TV or internet signals) unchanged. When an overvoltage occurs, for example due to a lightning strike in the power grid or antenna line, the arrester activates and safely diverts the excess energy to protect sensitive end devices. The remote power supply compatibility means the device also functions when a DC voltage (e.g. 12 V or 24 V) is transmitted via the coaxial cable to power end devices. Shielding according to Class A per EN 50 083-2 ensures that electromagnetic interference generated by other devices or environmental conditions is not transmitted into the signal.

Compatibility and Accessories
The arrester is designed for 75 Ohm coaxial cables and is used in SAT and cable TV systems. It is compatible with common F-connectors, which are standard in German and European installation technology. The remote power supply compatibility enables use in systems that transmit power via coaxial cable to end devices such as set-top boxes or distribution boxes.

Mounting and Installation
Installation is typically performed directly in the coaxial line, for example at the entry point of an apartment, in a distribution box, or at the antenna socket. The arrester is screwed into the line, with F-connectors connected on both sides. The space-saving design allows for compact installation, even in narrow distribution boxes.

Operational Advantages
The DGA GFF TV provides reliable surge protection for sensitive electronics in SAT and cable TV systems. The remote power supply compatibility reduces the need for additional power sources, simplifying installation. The high shielding effectiveness according to Class A per EN 50 083-2 ensures stable signal transmission and minimizes interference. The integrated test output enables easy diagnosis and maintenance of the system without requiring additional measuring instruments. The design is intended for use in typical residential and commercial installations, where installation can be performed quickly and without special expertise. Batteries are not included in the delivery scope.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/212755
qrcode für DEHN 909705 DGA GFF TV combination surge arrester gate 75 Ohm