DEHN 909655, EAN: 4013364562752

DEHN 909655 SET 1 DSH ZP B2 LSG TT + 1X DSHU 3P 35

DEHN 909655 SET 1 DSH ZP B2 LSG TT + 1X DSHU 3P 35

Lieske Part No. 2488881
Mfg Part No 909655
EAN-Code 4013364562752
Manufacturer DEHN
Here only 253,98 EUR
302,24 EUR incl. VAT

Further information for DEHN 909655 SET 1 DSH ZP B2 LSG TT + 1X DSHU 3P 35

Extended technical data: DSH ZP B2 LSG TT 255
Protection level [L-PE] (UP)≤ 1,6 kV
Technical data: DSH ZP B2 LSG TT 255
SPD according to EN 61643-11 / IEC 61643-11Type 1 + Type 2 + Type 3 / Class I + Class II + Class III
Energy-coordinated protective effect to end device (≤ 10 m)Type 1 + Type 2 + Type 3
Nominal voltage AC (UN)230 / 400 V (50 / 60 Hz)
Maximum continuous voltage AC (UC)255 V (50 / 60 Hz)
Lightning impulse current (10/350 µs) [L1+L2+L3+N-PE] (Itotal)30 kA
Lightning impulse current (10/350 µs) [L-N] (Iimp)7,5 kA
Specific energy [L-N] (W/R)14.06 kJ/Ohm
Lightning impulse current (10/350 µs) [N-PE] (Iimp)30 kA
Specific energy [N-PE] (W/R)225 kJ/Ohm
Rated discharge current (8/20 µs) [L-N]/[N-PE] (In)20 / 80 kA
Protection level [L-N] (UP)≤ 1,5 kV
Protection level [N-PE] (UP)≤ 1,5 kV
No-load voltage of hybrid generator (UOC)20 kV
Max. mains-side overcurrent protection160 A gG
TOV voltage [L-N] (UT) – characteristic440 V / 120 min. – withstand
TOV voltage [N-PE] (UT) – characteristic1200 V / 200 ms – withstand
Operating temperature range (TU)-40 °C ... +80 °C
Function / fault indicatorgreen / red
Number of ports1
Connection cross-section (PEN, 9 )16-25 mm2 fine-stranded / 16-35 mm2 stranded
Mounting on40-mm busbar system
Housing materialThermoplastic, colour red, UL 94 V-0
Mounting positionIndoor
Degree of protectionIP 30 (with cover)
Mounting dimensions3 TE, DIN 43880
ApprovalsVDE
Supply voltage (for RfZ/APZ according to VDE-AR-N 4100) (UN)230 V
Compatible circuit breakers (manufacturer, type)ABB S201P-B6, Hager MB199
Rated current of circuit breaker (In)6 A
Release characteristicB
Technical data: DSHU 3P ..
Functionsingle-pole switching
Insulation test voltage at 50/60 Hz - 1 min2 kV
Power supply systemAny
Switch position indicatorRed ON / Green OFF
Tightening moment2,5 ... 3 Nm
Operating part designtoggle handle
Recommended screwdriverPhillips No. 2 Pozidriv, slot 1 x 5.5
Tripping characteristic (selective)E
Rated operating voltage (AC)230 / 400 V
Rated insulation voltage according to IEC / EN 60664-1 (Ui)690 V
Rated impulse withstand voltage (Uimp)6 kV
Rated impulse voltage withstand at 2000 m (Uimp)8 kV
Input voltage typeAC
Rated current (In)35 A
Rated switching capacity (230 / 400 V AC)25 kA
Rated frequency (f)50 / 60 Hz
Power loss under rated conditions per pole6.9 W
Over voltage categoryIV
Ambient temperature (in operation)-25 ... +55 °C
Ambient temperature (storage)-40 ... +70 °C
Pollution degree3
Dimensions4.5 TE, DIN 43880
StandardsDIN VDE 0641-21
Disconnect functionJa
Set aus Kombi-Ableiter Typ 1 + Typ 2 + Typ 3 nach EN 61643-11 für TT- und TN-S-Systeme (3+1-Schaltung) und selektivem Haupt-Leitungsschutzschalter DSHU. Nachträgliche Integration eines einpoligen B6 Leitungsschutzschalters möglich zur Realisierung einer Spannungsversorgung des intelligenten Messystems. Zwei Buchsen für die 230 V Spannungsversorgung (N und L) jeweils für RfZ / APZ gem. VDE-AR-N 4100 sind im Gerät integriert, zum Einsatz auf dem 40 mm Sammelschienensystem im Hauptstromversorgungssystem nach DIN VDE 0100-443 bei Gebäuden ohne äußeres Blitzschutzsystem (auch mit Freileitungseinspeisung), direkte Einspeisung der Außenleiter am selektiven Hauptleitungsschutzschalter, sperr und plombierbar mit einem Bemessungsschaltvermögen von 25 kA nach DIN VDE 0100-537 bzw. DIN EN 60947 nach Charakteristik E.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/2488881
qrcode für DEHN 909655 SET 1 DSH ZP B2 LSG TT + 1X DSHU 3P 35