| Technical data |
| Nominal System Voltage [L-G] / [L-L] (UN) | 277 V a.c. / 480 V a.c. |
| Frequency | 50 / 60 Hz |
| Max. continuous operating voltage [L-G] / [L-L] (MCOV) | 320 V a.c. / 555 V a.c. |
| Lightning impulse current (10/350 µs) (Iimp) | 25 kA |
| Lightning impulse current (10x350 µs) [L1+L2+L3-G] (Itotal) | 75 kA |
| Nominal discharge current (8/20 µs) (In) | 20 kA |
| Voltage Protection Rating [L-G] / [L-L] (VPR) | 1800 Vpk / 3000 Vpk |
| Short circuit current rating (SCCR) | 30 kA when installed with any class J fuse (150 - 200 A) or Littlefuse LVSP-60 kA |
| System type | 3 Phase Wye |
| Operating temperature range (TU) | -40°C…+80°C |
| Operating state / fault indication | Green = Good ; Red = Replace Module |
| Cross-sectional area (min.) | 4 AWG / 25 mm2 |
| Cross-sectional area (max.) | 2 AWG / 35 mm2 |
| Terminal Torque Ratings | 65 Lbs-in |
| For mounting on | 35 mm DIN rails acc. to EN 60715 |
| Enclosure material | thermoplastic, red, UL 94 V-0 |
| Degree of protection | IP20 |
| Capacity | 6 Standard DIN module, DIN 43880 |
| Approvals | UL |
| Type of remote signalling contact | Floating (dry), Form C (SPDT) |
| Remote status NEC circuits | NEC Class 2 circuits only |
| Cross-sectional area for remote signalling terminals | AWG 14-22 / 2.5 mm2 - 0.34mm2 |
| Remote Status Terminal Torque Ratings | 3 Lbs-in |
Dreipoliger Blitzstromableiter DEHNguard MU, Open-Type 1 SPD nach ANSI/UL 1449 4th Ed. bestehend aus Basisteil und gesteckten Schutzmodulen auf Funkenstreckenbasis. Ermöglicht Endgeräteschutz. Zum Schutz von 3 Phase Wye Systemen.