| General |
| SPD class | G |
| Nominal voltage (UN) | 180 V |
| Max. continuous operating voltage DC (UC) | 180 V |
| Max. continuous operating a.c. voltage (UC) | 127 V |
| Nominal current (IN) | 0.4 A |
| D1 Total lightning impulse current (10/350 µs) (Iimp) | 5 kA |
| D1 Lightning impulse current (10/350 µs) per line (Iimp) | 2.5 kA |
| C2 Total nominal discharge current (8/20 µs) (In) | 10 kA |
| C2 Nominal discharge current (8/20 µs) per line (In) | 5 kA |
| Voltage protection level line-line for Iimp D1 (UP) | ≤ 850 V |
| Voltage protection level line-PG for Iimp D1 (UP) | ≤ 600 V |
| Voltage protection level line-line at 1 kV/µs C3 (UP) | ≤ 850 V |
| Voltage protection level line-PG at 1 kV/µs C3 (Up) | ≤ 600 V |
| Series impedance per line | ≤ 0.005 ohms |
| Capacitance line-line (C) | ≤ 5 pF |
| Capacitance line-PG (C) | ≤ 5 pF |
| Operating temperature range (TU) | -40 °C ... +80 °C |
| Degree of protection | IP 10 |
| Pluggable into | LSA disconnection block 2/10 |
| Earthing via | mounting frame |
| Enclosure material | polyamide PA 6.6 |
| Colour | grey |
| Test standards | IEC 61643-21 / EN 61643-21 |
Lightning current-carrying DRL plug-in magazine 10 DA with three-pole gas discharge arresters for almost all applications and can be expanded with DRL protective plugs to form a combined arrester. The integrated disconnection block contacts allow testing, measuring and patching when the protection is plugged in.