DEHN 900985, EAN: 4013364529199

DEHN 900985 DCU 2 YPV 1+2 1200 1M 1S MC4 GAK Type 1+2 IP65

DEHN 900985 DCU 2 YPV 1+2 1200 1M 1S MC4 GAK Type 1+2 IP65

Lieske Part No. 124700
Mfg Part No 900985
EAN-Code 4013364529199
Manufacturer DEHN
Here only 293,07 EUR
348,75 EUR incl. VAT

Further information for DEHN 900985 DCU 2 YPV 1+2 1200 1M 1S MC4 GAK Type 1+2 IP65

General
Degree of protectionIP 65
Overvoltage protection type1+2
Plug connectionOriginal MC4
NormDIN EN IEC 61439-2
Application standardDIN IEC 60364-7-712:2011-04
Number of MPP inputs1
Number of strings1
SPD according to EN 61643-31 / IEC 61643-31type 1 + type 2 / class I + class II
Short-circuit withstand capability (ISCPV)10 kA
Total discharge current (10/350 µs) [DC+/DC- - PE] (Itotal)12.5 kA
Lightning impulse current (10/350 µs) [DC+ - PE/DC- - PE] (Iimp)6.25 kA
Voltage protection level (UP)< 3.8 kV
Nominal load current (IL)40 A
Response time (tA)≤ 25 ns
Operating temperature range (TU)-35°C to +60°C
Operating state / fault indicationgreen / red
Number of ports1
cross-sectional area () (min.)2x 10 mm2 / 1x 16 mm2
Cross-sectional area () (max.)35 mm2 stranded / 25 mm2 fine-stranded
Cross-sectional area for MC4 connector (DC+, DC-) (min.)2.5 mm2 fine-stranded
Cross-sectional area for MC4 connector (DC+, DC-) (max.)10 mm2 fine-stranded
Place of installationindoor installation
Rated insulation voltage (DC) (Ui)1500 V
TypeWith pressure compensating element
CoverTransparent cover with product label
Enclosure colourgrey
Number of cable entries2x original MC4 plug (PV-ADS4-EVO 2A), 2x original MC4 socket (PV-ADB4-EVO 2A), 2x M20
The generator connection box DCU 2 YPV 1+2 1200 1M 1S MC4 from DEHN is a specifically designed enclosure system for photovoltaic installations. It serves for the safe and standard-compliant connection of PV modules with an MPP input and a string, where the protection rating IP65 ensures high resistance against dust and water. The use of original MC4 connectors ensures a reliable electrical connection and compatible connection to common PV modules. The box is designed according to DIN EN IEC 61439-2, ensuring compliance with safety and quality requirements for low-voltage switchgear. The application is in accordance with DIN IEC 60364-7-712:2011-04, the standard for the installation of photovoltaic supply systems.

Applications

The generator connection box is intended for use in photovoltaic installations, particularly in systems where an MPP input and a string are connected via a central connection point. The protection rating IP65 makes it suitable for outdoor use, as it is protected against dust and water jets from all directions. This is especially important for installations on roofs or in open areas, where the devices are exposed to weather conditions.

Functions and Equipment in Detail

The box integrates a protection type 1+2, providing both surge protection and additional protection for the string. The use of original MC4 connectors ensures a mechanically stable and electrically reliable connection. The construction is tailored to the requirements of PV installations, with compliance with the standard DIN EN IEC 61439-2 ensuring electrical safety and system reliability.

Technology Explained Simply

The protection rating IP65 means that the housing is completely dust-tight and protected against water jets from all directions. This is crucial for long-term stability in outdoor environments. The integrated surge protection type 1+2 protects the installation from transient voltage spikes caused by lightning strikes or other electrical disturbances. The MC4 connectors are standardized in the photovoltaic industry and enable quick and secure installation.

Compatibility and Accessories

The generator connection box is designed for use with PV modules equipped with MC4 connectors. Compatibility with common PV systems is ensured by the use of original MC4 connectors. Compliance with the standard DIN IEC 60364-7-712:2011-04 ensures that the box can be integrated into existing PV installations built according to these guidelines.

Installation and Mounting

Installation is carried out according to the requirements of the standard DIN IEC 60364-7-712:2011-04. The box is designed for outdoor use and must be installed at a protected, accessible location to ensure a safe and maintenance-friendly installation. Wiring is done via the integrated MC4 connectors, enabling a secure and quick connection.

Operational Advantages

The use of the generator connection box ensures high safety and reliability of the PV installation. The integrated surge protection function type 1+2 protects the installation from damage caused by electrical disturbances. The protection rating IP65 ensures a long service life in outdoor environments. The use of original MC4 connectors reduces the risk of incorrect connections and increases operational safety.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/124700
qrcode für DEHN 900985 DCU 2 YPV 1+2 1200 1M 1S MC4 GAK Type 1+2 IP65