DEHN 900585, EAN: 4013364498983

DEHN 900585 DVA EMOB M 3P 255 FM combination arrester Type 1+2

DEHN 900585 DVA EMOB M 3P 255 FM combination arrester Type 1+2

Lieske Part No. 840276
Mfg Part No 900585
EAN-Code 4013364498983
Manufacturer DEHN
Here only 1.048,80 EUR
1.248,07 EUR incl. VAT

Further information for DEHN 900585 DVA EMOB M 3P 255 FM combination arrester Type 1+2

General
SPD according to EN 61643-11 / IEC 61643-11type 1 + type 2 / class I + class II
Energy coordination with terminal equipment (≤ 10 m)type 1 + type 2 + type 3
Nominal voltage (a.c.) (UN)230 / 400 V (50 / 60 Hz)
Max. continuous operating voltage (a.c.) [L-N]/[N-PE] (UC)255 V (50 / 60 Hz)
Lightning impulse current (10/350 µs) [L-N]/[N-PE] (Iimp)12.5 / 50 kA
Specific energy [L-N]/[N-PE] (W/R)39.06 kJ/ohms / 625.00 kJ/ohms
Nominal discharge current (8/20 µs) (In)25 / 100 kA
Voltage protection level [L-N]/[N-PE] (UP)≤ 1.5 kV / ≤ 1.5 kV
Follow current extinguishing capability [L-N]/[N-PE] (Ifi)50 kArms / 100 Arms
Follow current limitation / SelectivityNo tripping of a 35 A gG fuse up to 50 kArms (prosp.)
Response time (tA)≤ 100 ns
Max. backup fuse (L) up to IK ≤ 25 kArms250 A gG
Max. backup fuse (L) up to IK ≤ 50 kArms250 A gG
Temporary overvoltage (TOV) [L-N] (UT) – Characteristic440 V / 120 min. – withstand
Temporary overvoltage (TOV) [N-PE] (UT) - Characteristic1200 V / 200 ms – withstand
Operating temperature range [parallel]/[series] (TU)-40°C...+80°C
Operating state / fault indicationgreen / red
Number of ports1
Cross-sectional area (L1, L2, L3, N, PE, ) (min.)1.5 mm2 solid / flexible
Cross-sectional area (L1, L2, L3, N, PE, ) (max.)35 mm2 stranded / 25 mm2 flexible
For mounting on35 mm DIN rails acc. to EN 60715
Enclosure materialthermoplastic, red, UL 94 V-0
Place of installationindoor installation
Degree of protectionIP 20
Capacity4 Standard DIN module, DIN 43880
ApprovalsKEMA, UL
Type of remote signalling contactchangeover contact
Switching capacity (a.c.)250 V / 0.5 A
Switching capacity (d.c.)250 V / 0.1 A; 125 V / 0.2 A; 75 V / 0.5 A
Cross-sectional area for remote signalling terminalsmax. 1.5 mm2 solid / flexible
Insulation measurement possible when connectedup to 500 V DC
Extended technical data
Voltage protection level [L-PE] (UP)1.8 kV
Universell einsetzbarer Kombiableiter DEHNvap EMOB, Typ 1 + Typ 2 nach EN 61643-11 bestehend aus Basisteil und steckbarem Schutzmodul. Platzsparende RAC-Funkenstreckentechnologie mit nur 1 TE / Pol ermöglicht kompakte Ausführung. Speziell für den Einsatz in Stromversorgungssystemen für Ladeinfrastruktur. Durch energetisch koordinierte Schutzwirkung Typ 1 + Typ 2 + Typ 3 wird Endgeräteschutz ermöglicht. Zum Schutz vor Überspannungen, auch bei direkten Blitzeinschlägen. Einsetzbar nach dem Blitz-Schutzzonen-Konzept an den Schnittstellen 0A - 2.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/840276
qrcode für DEHN 900585 DVA EMOB M 3P 255 FM combination arrester Type 1+2