Further information for DEHN 900446 surge arrester Type 2 cord
Technical data
SPD according to EN 61643-11 / IEC 61643-11
Type 2 / Class II
Energy-coordinated protective effect to end device (≤ 10 m)
Type 2 + Type 3
Nominal voltage AC (UN)
230 V (50 / 60 Hz)
Maximum continuous operating voltage AC [L-N] (UC)
275 V (50 / 60 Hz)
Maximum continuous operating voltage AC [N-PE] (UC)
255 V (50 / 60 Hz)
Nominal discharge current (8/20 µs) (In)
5 kA
Maximum discharge current (8/20 µs) (Imax)
10 kA
Protection level [L-N] (UP)
≤ 1,5 kV
Protection level [L-N] at 3 kA (UP)
≤ 1 kV
Protection level [L-N] at 1.5 kA (UP)
≤ 0,85 kV
Protection level [N-PE] (UP)
≤ 1,5 kV
Follow current interruption capability [N-PE] (Ifi)
100 Aeff
Response time [L-N] (tA)
≤ 25 ns
Response time [L/N-PE] (tA)
≤ 100 ns
Maximum load current AC (IL)
10 A
Max. mains-side overcurrent protection
B 16 A
Short-circuit withstand capability with network-side overcurrent protection (ISCCR)
1 kAeff
Short-circuit withstand capability with network-side overcurrent protection with 16 A gG (ISCCR)
6 kAeff
TOV voltage [L-N] (UT) – characteristic
335 V / 5 sec. – withstand, 440 V / 120 min. – safe failure
TOV voltage [N-PE] (UT) – characteristic
1200 V / 200 ms. – safe failure
Fault indication
Red
Number of ports
1
Operating temperature range (TU)
-40 °C ... +80 °C
Connection stranded wires
1.5 mm2, length 60 mm
Housing material
Thermoplastic, colour red, UL 94 V-2
Mounting position
Indoor, fuse enclosures / cable transition boxes for pole mounting
Degree of protection in installed state
IP 20
Approvals
KEMA
Additional tests
---------------------------------
Total discharge surge current (Isum)
20 kA
Extended technical data
---------------------------------
Combined surge (UOC)
10 kV
Interruption of load circuit in fault condition
Zweipoliger Überspannungsableiter DEHNcord L, Typ 2 nach EN 61643-11, in kompakter Bauform zum Einsatz in Kabelübergangskästen von LED-Mastleuchten mit Abschaltung des Laststromkreises im Fehlerfall. Zum Einsatz im Blitz-Schutzzonen-Konzept an den Schnittstellen 0B - 1 und höher.