DEHN 900445, EAN: 4013364280380

DEHN 900445 surge arrester Type 2 cord

Energy > Surge Protection

DEHN 900445 surge arrester Type 2 cord

Lieske Part No. 154616
Mfg Part No 900445
EAN-Code 4013364280380
Manufacturer DEHN
Here only 88,92 EUR
105,81 EUR incl. VAT

Further information for DEHN 900445 surge arrester Type 2 cord

Technical data
SPD according to EN 61643-11 / IEC 61643-11Type 2 / Class II
Energy-coordinated protective effect to end device (≤ 10 m)Type 2 + Type 3
Nominal voltage AC (UN)230 V (50 / 60 Hz)
Maximum continuous operating voltage AC [L-N] (UC)275 V (50 / 60 Hz)
Maximum continuous operating voltage AC [N-PE] (UC)255 V (50 / 60 Hz)
Nominal discharge current (8/20 µs) (In)5 kA
Maximum discharge current (8/20 µs) (Imax)10 kA
Total discharge current (8/20 µs) [L+N-PE] (Itotal)20 kA
Protection level [L-N] (UP)≤ 1,5 kV
Protection level [L-N] at 3 kA (UP)≤ 1 kV
Protection level [L-N] at 1.5 kA (UP)≤ 0,85 kV
Protection level [N-PE] (UP)≤ 1,5 kV
Follow current interruption capability [N-PE] (Ifi)100 Aeff
Response time [L-N] (tA)≤ 25 ns
Response time [L/N-PE] (tA)≤ 100 ns
Maximum load current AC (IL)10 A
Max. mains-side overcurrent protectionB 16 A
Short-circuit withstand capability with network-side overcurrent protection (ISCCR)1 kAeff
Short-circuit withstand capability with network-side overcurrent protection with 16 A gG (ISCCR)6 kAeff
TOV voltage [L-N] (UT) – characteristic335 V / 5 sec. – withstand, 440 V / 120 min. – safe failure
TOV voltage [N-PE] (UT) – characteristic1200 V / 200 ms. – safe failure
Fault indicationRed
Number of ports1
Operating temperature range (TU)-40 °C ... +80 °C
Connection stranded wires1.5 mm2, length 60 mm
Housing materialThermoplastic, colour red, UL 94 V-2
Mounting positionIndoor, fuse enclosures / cable transition boxes for pole mounting
Degree of protection in installed stateIP 20
ApprovalsKEMA
Extended technical data---------------------------------
Combined surge (UOC)10 kV
Interruption of load circuit in fault conditionYes
Three-pole surge arrester DEHNcord L, type 2 according to EN 61643-11, in a compact design for use in cable junction boxes of LED mast lights with shutdown of the load circuit in the event of a fault and protection of the control phase. For use in the lightning protection zone concept at the interfaces 0B - 1 and higher.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/154616
qrcode für DEHN 900445 surge arrester Type 2 cord