| General |
| Material | stainless steel V2A (1.4301) |
| Diameter | 10 mm |
| Norm | DIN EN 62561-2 (VDE 0185-561-2) |
| Application range | Lightning protection systems, equipotential bonding |
The stainless steel wire RD 10 V2A R80M from DEHN is a product specifically developed for use in lightning protection systems and equipotential bonding systems. It is made of stainless steel grade V2A (1.4301), a non-corrosive material known for its high corrosion resistance and mechanical strength. With a diameter of 10 mm and a length of approximately 80 meters, it is suitable for connecting grounding elements, diverting lightning currents, or creating equipotential bonding conductors in electrical installations. The use in lightning protection technology requires materials that remain stable over time and exhibit high electrical conductivity as well as mechanical strength – here, the wire meets the necessary requirements.
Lightning protection systems are systematic measures for diverting lightning currents into the ground to protect buildings and people inside, as well as technical equipment. The stainless steel wire RD 10 V2A R80M is used here as a connecting element between different grounding points or as part of the diversion conductors. It ensures a reliable electrical connection that remains stable even under extreme conditions such as high currents or mechanical stress.
Equipotential bonding is an essential component of electrical safety, especially in buildings with multiple grounding points. By using this wire, it is ensured that all metallic parts of a building are at the same electrical potential, avoiding dangerous voltage differences. This is particularly important in rooms with increased fire or electric shock risks, such as industrial facilities, hospitals, or laboratories.
Technology explained clearly: The wire is manufactured according to DIN EN 62561-2 (VDE 0185-561-2), a standard specifically for lightning protection materials. This standard sets requirements for electrical conductivity, mechanical strength, corrosion resistance, and testing procedures. The use of stainless steel V2A (1.4301) ensures that the wire remains functional over the long term even in moist or aggressive environments. The conductivity is sufficient to safely divert lightning currents without causing overheating or breakage.
Compatibility and accessories: The wire is suitable for use in existing or newly constructed lightning protection systems. It can be combined with other products from the manufacturer DEHN, such as grounding elements, diverters, or connecting elements. Connections are typically made using screw connections, clamps, or welding methods, with specific installation methods depending on the respective system and regulations.
Installation and mounting: Installation is usually carried out by qualified specialists in accordance with applicable standards and regulations. The wire is laid along the designated connection routes, taking into account bending radii and mechanical stress. Proper connection to grounding elements and other conductors is crucial for the overall functionality of the system. Installation often takes place outdoors or in technical rooms, where environmental conditions (e.g., humidity, temperature) influence material selection.
Operational advantages: The use of stainless steel V2A provides high long-term stability, as the material is resistant to moisture, salt, and other corrosive factors. This reduces the need for maintenance and increases system reliability. The high mechanical strength allows for safe installation even in structurally demanding environments. Compliance with the DIN EN 62561-2 standard ensures that the product meets lightning protection requirements and is recognized in official inspections.