| General |
| Diameter Ø conductor | 8 mm |
| Cross section | 50 mm² |
| Material | Cu |
| Properties | semi-rigid F25 |
| Standard | EN 62561-2 |
| Specific conductance | ≥ 52.63 m / Ohm mm² |
| Specific resistance | ≤ 0.019 Ohm mm² / m |
| Short-circuit current (AC 50 Hz / DC) (1 s; ≤ 300 °C) | 9.7 kA |
| Length tolerance | +/- 5% |
The product RD 8 CU F25 HH R100M from DEHN is a copper wire for use in lightning protection, earthing systems, and equipotential bonding. It complies with the standard DIN EN 62561-2 (VDE 0185-561-2) and is specifically designed for applications in the field of electrical safety and protection technology. The wire has a diameter of 8 mm and a cross-section of 50 mm², with the material being copper (Cu). The grade is half-hard (F25), ensuring sufficient bending strength while maintaining workability.
Applications
This round wire is intended for use in lightning protection systems, earthing systems, and equipotential bonding systems. It serves as a conductor for diverting lightning currents, fault currents, or for connecting metallic parts to minimize voltage differences. The standard DIN EN 62561-2 defines the requirements for conductors and connection elements for such systems, making the wire suitable for professional installations in the electrical and protection technology sectors.
Functions and Features in Detail
The wire has a specific conductance of at least 52.63 m / Ohm mm², indicating high electrical conductivity. The specific resistance is at most 0.019 Ohm mm² / m, which is typical for copper conductors of this quality and enables efficient current flow. The half-hard grade (F25) ensures that the wire does not deform too easily during processing, yet remains flexible enough to safely perform bends and connections.
Technology Explained Simply
The specified values for conductance and resistance are crucial for the wire's effectiveness in protection systems. High conductance means the wire can efficiently divert current, especially high currents such as those from a lightning strike, without overheating excessively. The short-circuit current is 9.7 kA for a duration of 1 second at a maximum temperature of 300 °C, describing the wire's thermal and mechanical load capacity under extreme conditions. These values are essential to ensure the wire does not melt or break even under sudden, high current loads.
Compatibility and Accessories
The wire is designed for use with other products from DEHN's round wire product family, particularly with connectors and mounting elements such as cross connectors, longitudinal connectors, parallel connectors, T-connectors, and pipe clamps. These components enable secure and standard-compliant connections and mounting of the wire in complex protection systems. The use of accessory parts is necessary to ensure a durable and reliable electrical connection.
Installation and Mounting
The wire is supplied in coil lengths of 100 m, with a length tolerance of ±5 % allowed. Installation typically involves securing the wire to suitable brackets or using connecting pieces, with the connection technique complying with the requirements of DIN EN 62561-2. The half-hard grade facilitates processing but still requires appropriate tools and knowledge when working with electrical protection systems.
Operational Advantages
The use of the round wire RD 8 CU F25 HH R100M ensures high reliability in protection systems. The high electrical conductivity and thermal load capacity ensure the wire performs its function even under extreme conditions. Compliance with DIN EN 62561-2 ensures the wire can be used in professional installations without requiring additional inspections or approvals. The supply in coil lengths of 100 m enables efficient planning and installation in larger projects.