DEHN 810404, EAN: 4013364048256

DEHN 810404 BA 40X4 STTZN R40M band 40x4 mm St/tZn Z500 R40m

Installation > Grounding Systems > Lightning protection material

DEHN 810404 BA 40X4 STTZN R40M band 40x4 mm St/tZn Z500 R40m

Lieske Part No. 260259
Mfg Part No 810404
EAN-Code 4013364048256
Manufacturer DEHN
Here only 1.128,60 EUR
1.343,03 EUR incl. VAT

Further information for DEHN 810404 BA 40X4 STTZN R40M band 40x4 mm St/tZn Z500 R40m

General
MaterialSteel
Surface coatingzinc coating
Zinc coating thickness70 µm
Zinc mass500 g/m²
NormDIN EN 62561-2
Application rangeLightning protection and earthing systems
The product is a steel strip of the brand DEHN, type BA 40X4 STTZN R40M, specifically designed for use in lightning protection and earthing systems. It is a metallic strip with dimensions of 40 mm width and 4 mm thickness, serving as a conductor system in electrical protection installations. The strip is made of steel and coated with zinc, forming a corrosion-resistant protective layer. The zinc coating corresponds to an average thickness of 70 µm, equivalent to a mass of approximately 500 g/m². This coating is specified according to DIN EN 62561-2 (VDE 0185-561-2), a standard defining requirements for materials used in lightning protection and earthing systems. The strip is supplied in a length of approximately 40 meters, making it suitable for longer installations in buildings or outdoor environments.

Applications

The steel strip is primarily used in lightning protection systems and earthing installations, where reliable electrical conductivity and mechanical stability are required. It serves as a connecting element between various earthing points, such as earth rods, earth grids, or foundation earthing, enabling a safe discharge path for lightning currents or fault currents. Due to the zinc coating, it is also suitable for outdoor use, where it provides protection against atmospheric corrosion. The DIN EN 62561-2 standard ensures that the material meets the necessary electrical and mechanical properties for this application.

Functions and Equipment in Detail

The strip is designed as a continuous conductor loop, providing high electrical conductivity. The steel construction ensures mechanical strength, while the zinc coating protects the surface from oxidation. The coating thickness of 70 µm (approx. 500 g/m²) meets the requirements of DIN EN 62561-2, ensuring that the material maintains its conductivity and structural integrity over a long period. The dimensions of 40 mm width and 4 mm thickness provide sufficient cross-sectional area for the flow of high currents, such as those occurring during lightning strikes. The length of approximately 40 meters offers flexibility in planning and installation in larger systems.

Technology Explained Simply

The steel strip functions as an electrical conductor integrated into a protection system to safely divert dangerous currents. The zinc coating acts as a barrier against moisture and oxygen, which would otherwise attack the steel surface and cause rust. This is particularly important in outdoor installations or in humid indoor environments, where corrosion could impair conductivity. The DIN EN 62561-2 standard specifies that materials for lightning protection and earthing systems must meet minimum requirements regarding chemical composition, mechanical strength, and surface coating. The DEHN steel strip complies with these requirements.

Compatibility and Accessories

The strip is designed for use in systems based on the DIN EN 62561-2 standard. It can be combined with other components such as earth rods, earth grids, connection clamps, or transition elements to create a complete earthing system. Connections are typically made using special clamps or welding, which must also comply with the standard’s requirements. Installation can take place along buildings, in foundations, or outdoors, depending on the requirements of the protection system.

Installation and Mounting

Installation involves laying the strip along the designated route, ensuring mechanical strength and electrical continuity. The strip can be bent or cut using special tools to adapt to the specific geometry of the installation. Connections to other earthing elements are made using appropriate clamps or welding, with connection points also required to meet standard specifications. The installation should be carried out to avoid mechanical stress in the strip, which could impair its conductivity.

Advantages in Operation

The steel strip offers high mechanical stability and long-lasting electrical conductivity, even under environmental influences such as moisture or temperature fluctuations. The zinc coating extends the material’s service life and reduces maintenance frequency. Conformity with DIN EN 62561-2 ensures that the product can be used in professional protection systems without requiring additional testing or approvals. The length of approximately 40 meters allows for efficient planning and installation without frequent connections, which could introduce additional resistance.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/260259
qrcode für DEHN 810404 BA 40X4 STTZN R40M band 40x4 mm St/tZn Z500 R40m