| General |
| Diameter Ø conductor | 10 mm |
| Cross section | 78 mm² |
| Material | St/tZn |
| Standard | based on EN 62561-2 |
| Diameter Ø outside | 13 mm |
| Sheath material | plastic |
| Sheath thickness | 1.5 mm |
| Type | UV-stabilised |
| Zinc coating | ≥ 50 µm average (about 350 g/m2) |
| Specific conductance | ≥ 6.66 m / Ohm mm² |
| Specific resistance | ≤ 0.25 Ohm mm² / m |
| Short-circuit current (AC 50 Hz / DC) (1 s; ≤ 300 °C) | 5.5 kA |
| Length tolerance | +/- 5% |
Steel wire according to DIN EN 62561-2 (VDE 0185-561-2), for use in lightning protection systems and earthing systems. Version with plastic sheath, as additional mechanical protection / corrosion protection, e.g. for connection lugs to the lightning protection system or to the main earthing bar. Suitable for laying in the ground, on, in and under plaster, mortar or concrete.